Here's a link to the lower ball joints. Repair Guides Rear Suspension Lower Ball Joints AutoZone com Here's a link to the upper ball joints. Repair Guides Front Suspension Lower Ball Joints AutoZone com
SOURCE: front upper ball joint replacement
The dealer's answer (if you are interested).......
The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked into the steering knuckle using a special nut. The ball joint is a sealed-for-life type and requires no maintenance. If the ball joint is defective it will require replacement of the entire upper control arm.
Sorry.
SOURCE: lower ball joint removal how to
these jouints are pressed in and there is a flange that is flared this is what the tool numbers refer too.
SOURCE: 2000 lincoln ls bad ball joints! should i replace whole knuckle or just ball joints
yes you can buy just the ball joints
SOURCE: replace upper ball joint 2003 silverado 1500
The ball joints on both 2wd and 4wd upper are pressed in you need to remove snap ring and using a hammer pop out the old one out this is after you seperate the upper arm from the spindle. To install the new ball joint you should use a ball joint press that you can rent at most autoparts shops
SOURCE: How do I replace the upper ball joints in my 2002 Ford Explorer
The upper ball joints are replaceable without replacing the control arms. Use Moog K80008 ball joints and a ball joint press.
834 views
Usually answered in minutes!
×