Where is the oil filter on a 96 ford probe - 1996 Ford Probe

Most likely a vacuum leak. Check the main vacuum line on the power brake first...by now, a 96 will have rubber hoses drying out

fuel filter,tune up air filter.

1989 ford probe turbo 2.2L turbo the oil filter sandwich block thats adapted to the block of the motor... the Hole that comes out block and from where the sandwich adapter mounts to the block... is there suppose be some sorta plug or fitting there? is there possible get detailed picture so i know what im missing?

i have hole and ******** oil out... and trying get fixed so i can sell the car... to fix my current problem no motor for a mustang 5.0 gt so if anyone can help me out id greatly apppericate it...

The fluid you need is called mercon type ATF this is what ford recommends to use and should say it on the bottle. as for a filter for the transmission or engine I recommend motorcraft filters they meet ford specifications and are available at most auto parts stores.

take the battery out of the probe and try it, if it fits in the tray and does not hit the bottom of the hood then when you close then it fits.

159 7A100 Main Control 160 7H249 Oil Filter Recirculating Regulator Exhaust Seal 161 7A098 Oil Filter and Seal Assy

check all the engine fluids (water and oil) and replace the fuel filter.

Ford ATF is different from Dexron. Ford fluid contains banana oil, Dexron doesn't. Use only what it calls for. Or, you will always wonder. Good Luck.

check fuse that controlls fuel

If it's a 2.0L, 5 speed (1994-7) there are two DPFE solenoids (both w/ 3 vacuum ports) near the oil filter, which control the EGR valve. They are discontinued and impossible to find except on junked cars. (FORD #'s K5T44093-4)
I have to junk my 1996 Probe if I don't find them - Missouri emissions.