Troubleshooting p0741 code 2006 escape - 2006 Ford Escape

Question edited for a lot more clarity. Codes are P-Zero (0) not P-oh (o). Spelling also fixed.
Question moved to model category.

Here are your 3 codes with explanations and fixes. There are also a couple of videos, but one is in Spanish.

Hyundai Santa Fe P0743: Meaning, Causes, + Diagnosis

700r4transmissionhq.com https://www.700r4transmissionhq.com > p0743-hyund...
May 1, 2022 - P0743 is a generic OBD2 code that can occur in the Hyundai Santa Fe. It indicates that your ECU/TCM has found an issue with the torque ...

P0742 OBD-II Trouble Code: Torque Converter Clutch ...

YourMechanic https://www.yourmechanic.com > Articles
P0742 code means that the torque converter clutch circuit is behaving abnormally often due too dirty transmission fluid or valves.

Hyundai Santa Fe P0741 OBDII Transmission Code ...

700r4transmissionhq.com https://www.700r4transmissionhq.com > p0741-hyund...

Dec 11, 2018 - The vehicle's PCM (Powertrain Control Module) will throw the P0741 trouble code in the Santa Fe if there is a difference that is greater than ...

as long as the engine codes match they will fit. 2003 Ford Escape 2.0L VIN "B" 2003 Ford Escape 3.0L VIN "1" 2004 Ford Escape 2.0L VIN "B" 2004 Ford Escape 3.0L VIN "1" 2005 Ford Escape 2.3L VIN "H" 2005 Ford Escape 2.3L VIN "Z" Hybrid 2005 Ford Escape 3.0L VIN "1" 2006 Ford Escape 2.3L VIN "H" 2006 Ford Escape 2.3L VIN "Z" Hybrid 2006 Ford Escape 3.0L VIN "1"

Replace the valve body, no that would gain you nothing. The P0741 is a Torque converter fault, it is either not locking up or is stuck off, but that would not stop the car from moving. I suggest you seek professional help from a transmission repair shop.

The code is for a problem with the torque converter lockup circuit.
The circuit would need to be checked with a meter.

Where is the camshafts on BMW z3 1997

Hello: The code you have P0741 means the torque converter is stuck off. Either the solenoid is bad or the torque converter is bad. Troubleshooting with a GM scanner will help to diagnose this problem. Recommend letting a Transmission shop repair this.

This is a torque converter clutch solenoid code internal to the transmission. the computer has detected a fault in the operation of the solenoid. It will need to be diagnosed by a trained technician and may very likely require internal trans repairs.

P0741 means Torque Converter Clutch Circuit Performance or Stuck Off.

Please drive to a garage for help.

code PO 741 torque converter clutch,circuit performance problem or stuck in Off position

Torque Converter Clutch Circuit Performance or Stuck Off. You either have no power to the lock up convertor clutch or the activator is bad. Take it to a tranny guy for this one.Unless of course you know transmissions.