Question about 1998 Chevrolet C2500

1 Answer

Why I'am not getting spark to plugs?

Already changed dist.cap,rotor,plugs and wires,and crank sensor

Posted by Anonymous on

Ad

1 Answer

spikedude41

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Sounds like ignition module has failed or there is no power to the distributor.

Posted on Oct 13, 2014

Ad

5 Related Answers

Anonymous

  • 91 Answers

SOURCE: trouble shooting on chevy s-10 2.8 liter v6 pick up truck

sounds like the ground strap to me, it wouldn't be that the wires are in the wrong order that would still give you spark just to the wrong cylinder and believe me you'd know immediatly in that case.

No spark means no contact to the coil plain and simple..

Posted on Jan 08, 2009

Ad
bunnydawg

Roberta Smith

  • 5158 Answers

SOURCE: rought idle

blown head gasket

Posted on Apr 25, 2009

Woody J Hiatt

  • 306 Answers

SOURCE: truck has no spark changed fuel pump fuel filter

Odds are it is the $20.00 ignition control module but that may be another fluke change out of parts. LOL

Posted on May 01, 2009

Anonymous

  • 17 Answers

SOURCE: 98 ASTRO VAN SPUTTERS CHANGED WIRES,PLUGS,DIST.

Check your catalitic converter, you might start with an oxygen sensor first. your local muffler shop can do a temp check on the converter for you, but you can replace the oxgen sensor your self pretty easy.

Posted on Jun 11, 2009

Anonymous

  • 75 Answers

SOURCE: 97 chevy cargo van 5.7liter engine. Replaced fuel

try to spray some carburetor cleaner inside where the air goes in the engine...it will clean the system and it might start...
press some gas when you try to start the vehicle...
good luck!

Posted on Oct 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hello, I have a 02 GMC Sierra 4.3L v6. The problem I'm having is that the truck cranks over but no spark. I've changed the ICM, ignition coil, have pulse on the wire from the crankshaft sensor an all other...


There will b a senser under cap.and one on coil u should be able to have tested at any auto parts store..if not ....u should have codes in memory have it scaned

Jan 04, 2015 | Cars & Trucks

2 Answers

Have a 1992 Ford Probe that cranks but won't turn over. No spark coming from the plugs or dustributor cap. Has a new cap, plug wires, and coil as of a year ago. Spark plug are a bit worn right now. Car use...


See if you have spark coming out of the coil wire first.
If you don't : coil, wire, pick up coil, module or timing chain.
If you do : dist cap, rotor or wires

Jan 04, 2018 | Ford Probe Cars & Trucks

1 Answer

97 pontiac firebird 5.7L HAS NO spark from optispark but has spark from coil


This engine uses a special flat cap and a standard rotor, right ? The spark comes into the cap and thru the rotor, then to the spark plugs.
Have you replaced the rotor ?
The spark can jump thru the rotor and ground thru the dist. shaft.
Depending on where you are testing for spark, the coil could also be weak and not pushing the spark to the plugs.

Jun 23, 2012 | Cars & Trucks

1 Answer

97 dodge ram no spark


then i would replace whats called the hall effect sensor its that black plastic plate you see when you take dist cap off. just pull rotor and lift up the sensor.dist cap is what holds it on.also under the sensor will be a stamped sheet metal piece that looks like the top of a castle wall. make sure its not loose on the shaft.if it is then new dist will be needed

May 09, 2010 | 1997 Dodge Ram 1500 Club Cab

2 Answers

Why does'int my 1986 bmw 528e start?


Do you spark at the plugs? Most likely crankshaft sensor needs to be replaced. Welcome to computer controlled cars. : (

Mar 30, 2010 | BMW 528 Cars & Trucks

1 Answer

NO SPARK FROM PLUGS


REMOVE DIST. CAP AND CRANK ENGINE SEE IF ROTOR TURN IF IT NOT, CHECK TIMING BELT, IF IT TURNS CHECK FOR SPARK ON DIST. CAP WHERE COIL WIRE GOES IF SPARK CHANGE OUT SPARK PLUG WIRES.IF NO SPARK CHECK IGNITION COIL AND PICK UP COIL.

Nov 05, 2009 | 1992 Volkswagen Passat

2 Answers

91 jeep no spark


wd 40 your flywheel sensor plug

Sep 02, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1990 K5 Blazer DIED(Electrical?)?


There may be no injector pulse if the computor does not see a RPM signal.
There will be no spark if the ignition module does not see a dist pulse from the dist pickup.......a RPM signal.
Because you do not have both ......I would suggest to check/change the dist pick up.
Follow the wires from the ignition module inside the dist to the pickup which is also inside the dist.
If it is just a bad dist pickup....keep all your old parts as good spares.
Also...is the dist turning? to provide a RPM signal?
You will have to remove the dist to change the pick-up.....mark your timing locations......"rotor position" and "dist body location"before removal.
A quick test before installing the "repaired dist" .....plug it in the the truck wiring and turn on the key....DO NOT CRANK THE ENGINE OR YOU WILL LOSE YOUR DIST ROTOR CORRECT POSITION......as you spin the dist by hand .....the injectors should spray.

Aug 23, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

We replaced the crank sensor and cam sensor on a new 5.2 engine in a 1998 Dodge Durango. We checked and rechecked the connections and still no spark.


check the wiring harness at the coil,sometimes that plug will get loose or dirty resulting in a no spark.
The only ign system parts are the crank sensor,cam sensor,dist,dist cap,rotor,spark plugs,wires,and coil,and the ecm which controls all of these,is there a check engine light on?
run a scan tool to check for stored codes or system events stored in the ecm.

Jan 09, 2009 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
1998 Chevrolet C2500 Logo

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...