Question about Cars & Trucks
Take it to an independent shop and ask them to install an AC bypass pulley like this
Posted on Aug 10, 2017
its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.
Posted on Apr 17, 2009
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
On the 2.7 engine it is located beside the starter. You will have to remove the starters heat shield to gain excess to the crank sensor.
Posted on Jan 31, 2010
Tips for a great answer:
Mar 15, 2013 | 2003 Hyundai Santa Fe
May 22, 2012 | 2004 Hyundai Santa Fe
Dec 14, 2011 | 2004 Hyundai Santa Fe
Nov 08, 2011 | 2004 Hyundai Santa Fe
Sep 09, 2011 | 2004 Hyundai Santa Fe
Dec 27, 2009 | 2004 Hyundai Santa Fe
Nov 13, 2009 | 2004 Hyundai Santa Fe
Aug 02, 2009 | 2004 Hyundai Santa Fe
Jul 16, 2009 | 2003 Hyundai Santa Fe
64 people viewed this question
Usually answered in minutes!