Question about 2011 Chevrolet HHR
SOURCE: 2006 Chevrolet HHR LT Problem
After searching around, I found several posts that suggested reseating all the relays and fuses under the hood. After checking, I noticed nearly all of them were not seated well. I pushed them all down and I haven't had the problem since.
Posted on Jan 09, 2009
The input and output speed sensors look identical on the connector side. The one over the solenoid pack is the input, the one closer to the left frame rail or left front wheel is the output sensor. I hope this helps.
Posted on Apr 26, 2009
Its in different locations depending on if its 2wd or 4wd. For 2wd its in front of the drice shaft or for 4wd its in the tranfer case, just look for a white shape like box with wires plugged into it and you need a socket to remove it, iam not sure how much it is to replace as the cost varies at different shops.
Posted on Jun 19, 2009
Hello, the steering position sensor just snaps into the bottom of the steering column. remove the steering shaft at the bottom of steering column, then slide the sensor off
Posted on Jun 19, 2010
Tips for a great answer:
Nov 09, 2017 | Chevrolet Cars & Trucks
Mar 24, 2017 | 2011 Chevrolet HHR
Feb 28, 2017 | 2011 Chevrolet HHR
Nov 22, 2016 | 2011 Chevrolet HHR
Jan 25, 2016 | 2008 Chevrolet Chevrolet HHR LT
Aug 15, 2015 | Chevrolet Malibu Cars & Trucks
Oct 11, 2014 | 2006 Chevrolet HHR LT
Feb 28, 2014 | 2011 Chevrolet Chevrolet HHR LS
Feb 03, 2018 | 2006 Chevrolet HHR LT
382 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: