How do I set the clock on my 1990 buick century

Greg Bernett

• 2989 Answers

SOURCE: flasher out on buick and cannot find location to replace it

Open access panel directly under steering column, pull off flasher unit (metallic cylinder) take to auto parts store (no more than 10 bucks) , put on new one, drive safe.

Good Luck and please don't forget to rate!

Posted on Mar 16, 2009

honeymokey

• 3113 Answers

SOURCE: How do you set the clock on the correct time?

Turn radio off, press set and move the < > butons to set clock

Posted on Jun 24, 2009

Bonnie Quintos

• 293 Answers

SOURCE: my dash light went out on my 1990 buick century.

Find your fuse box, read the cover and find the cigarette lighter and match the drawings with the arrangement of the fuses, when you find it, pull it out and check if blown out or open circuit, then replace it with a the same value of amp. ok

Posted on Jan 05, 2010

SOURCE: 1990 Buick Century Wheel Cylinder

I would guess it is metric,as are most all bolts,except some large size chassis bolts,and have been since about 1983. You got rust issues also.

Posted on Mar 19, 2010

ZJ Limited

• 17970 Answers

SOURCE: how do i set the clock in a 1992 buick century

To set the clock, check this procedure:
1. With the radio ON or OFF, press SET. The SET indicatore will appear on the digitas display for five seconds.
2. You must begin to set the clock to the correct hour and minute during those five seconds. Press and hold SCAN until the correct hour appears on the display.
3. Press and hold SEEK until the correct minute appears on the display.

Hope help with this, remember rated this post, and TY for using Fixya.

Posted on Apr 15, 2010

Testimonial: "you know your stuff, worked perfectly. Thank you so much, very appreciated."