Question about 2004 Chrysler Pacifica

1 Answer

What causes#37 fuse to keep blowing on 2004 chrysler pacifica

#37 fuses keep blowing and car won't start. Engine turns over but won't start

Posted by Anonymous on

Ad

1 Answer

chargerhp

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 815 Answers

The fuse goes to the auto shutdown relay from there it goes to two powertrain control modules. Test the relay or replace or there is a short in the system

Posted on Sep 29, 2015

Ad

2 Related Answers

c17hydro

Greg Bernett

  • 2989 Answers

SOURCE: why does fuse # 25 keep blowing out on my Chrysler pacifica 2004

Fuses pop because it is breaking the direct line of voltage that is being selected...anotherwords...instead of when you turn on your radio and the incorrect amount of voltage that is being sent to the radio frys it, the fuse breaks/pops to stop the flow of voltage to the radio.

The problem seems to either be a bad relay or wires are touching somewhere in that system.

Posted on Nov 20, 2011

Ad
teds_repairs

teds repairs

  • 2101 Answers

SOURCE: My Chrysler Pacifica(2004) doesn't seem to

when a car does not start in park or stay in park that is your neutral safety switch on the transmission. the latch can be the lock actuator.

Posted on Dec 16, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would make my air conditioning compressor, body function control module fuse keep blowing


Unplug compressor and other related parts and try the fuse then,,this will tell you which part is the problem.

Dec 04, 2017 | Cars & Trucks

1 Answer

1995. Why does the engine fuse keep blowing?


If that is the only instance to blow the fuse; when the contact key is turned 'ON' the relay sets priority to 'start engine' mode, like directing the power to the starting accessories, now when instead you activate something else, the circuit is overloaded: Puff

Jul 28, 2015 | Dodge Ram 1500 Cars & Trucks

1 Answer

I have a 2002 Toyota corolla T sport 1.8 and have just had the engine rebuilt but it keeps blowing the 15 amp audio fuse under the bonnet, have tried putting a big amp fuse in and still blows. Car starts...


Hi,
Who installed the engine? If you did, check all the Grounds/Earths under the hood/bonnet. If the mechanic/shop did, take it back and have them fix it.

Td

Nov 21, 2012 | Cars & Trucks

1 Answer

Blown fuse amp start fuel 8


Pls be more specific, doe's this fuse keep blowing or what? Fuse blows and your car won't start. I have a 2004 GTC and the #8 fuse kept blowing, had to replace the starter, (it was pulling 80amps instead or the normal 30-35) once the starter was replaced, no more starting issues and the fuse no longer blows. Hope this helps, good luck

Sep 12, 2012 | 2004 Chrysler Sebring

1 Answer

Fuse in motor keep blowing and motor keeps running but once stopped won't restart


What year, make model and engine size there? Send details please.

Jun 27, 2012 | Cars & Trucks

1 Answer

Fuel injector fuse is blown, keeps blowing. Engine turns but won't catch and start.


if the injector fuse is blown then the car won`t start as its not getting fuel into the motor to fire.if the fuse keeps blowing then you could have an injector/s that is drawing too much or the injector driver in the ecm may not be any good and needs replacing or a used ecm.it could be a short some where in the wiring for the injector system that is going to ground.

Feb 22, 2012 | 1995 Chevrolet Lumina

2 Answers

20 amp fuse keeps blowing engine won't start, fuse


I am a mechanic,i had that same problem where my engine 20amp fuse were blowing....i fixed it...problem were a broken wire in the harnace on the side of the cylinder head....i made over $200 on that job...yahhh

Aug 01, 2011 | 2001 Mitsubishi Galant

1 Answer

My 02' mdx won't come out of park, keep blowing a 20 amp fuse. This fuse controls the Cruise, break lights, memory seat, horn and linkage. I have to manually delink. I have unhooked the comand...


Here is an idea, when do you blow the fuse key on, key on engine running, key on engine running hitting the break pedal? Try and get the key on without blowing fuse if possible, then one at a time try those circuit loads ie: horn, brake pedal and so on, if you isolate which load is pulling to many amps(blowing fuse) unplug that load itself, then restart testing, see if fuse stays ok. You can also substitue the fuse with a circuit breaker and unplug each load until click(of breaker) stops.

May 17, 2011 | 2003 Acura MDX

1 Answer

Fuses no. 7 & 37 on my 318is K-reg Bmw keep MELTING.


you have to figure out where there is a short in your wiring--follow wires, look for broken, missing insulation--if it started in lights, look there first maybe. Also check the connections of plugs. Good luck it may take some searching.

Mar 27, 2009 | 1996 BMW 318

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...