Cars & Trucks Logo

Related Topics:

W
William Frank Duke Posted on Oct 04, 2014

What is the length of the dip stick for a 1985 ford ranger pick up 4 cycender

How long is the oil dip stick for 1985 ford ranger pickup 4 cyclender

1 Answer

A

Anonymous

No idea & I doubt anyone knows

That doesn't really tell us why your asking

If you got no stick or some issue with it

Try a salvage yard for one,you do after all,
know the motor you have & oil pan configuration

5 Related Answers

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Jan 31, 2009

SOURCE: Timing problem with 1985 Ford Ranger

more than likely it is a timing problem,or the valves are not seating right,diesel in petrol ??air leak on inlet manifold without having the motor in front of me its difficult to diagnose.This is an older vehicle of potential classic possibilities.Therefore because its so valuable i would suggest you call a local mobile mechanic.One with a few years under his belt who has worked on these vehicles when they were new,and if he doesnt do it right kick his zimmer frame away

Ad

Ronnie Wilson

  • 1596 Answers
  • Posted on Feb 09, 2009

SOURCE: oil coming out of dip stick and valve cover breather

Exesive CrankCase Pressure, Check PCV Probably Cloged

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Apr 26, 2009

SOURCE: I can't locate the transmission fluid dip stick for 2003 Grandam

Your transmission is sealed and has no dip stick, checking the fluid level properly involves using a factory scan tool.

Joel Friedenberg

  • 1114 Answers
  • Posted on Aug 16, 2009

SOURCE: engine oil capacity

Looks like it takes 6 quarts w/ filter. Check out the info;
https://www.amsoil.com/scripts/runisa.dll?amsoiloaf:index

Anonymous

  • 104 Answers
  • Posted on Sep 19, 2009

SOURCE: how to install replacement door handles for 98 ford ranger pickup

remove interior door panel(need special tool to pop plastic clips holding panel to door)with panel off remove plastic film,with window up you should be able to see two 10m nuts-bolts to remove-also have to pop lever off that goes down to door latch

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to access windshield wiper assembly 1985 ford ranger pickup

You may be able to pick up some tips on You Tube. If the link is no help check out the thumbnails for other videos
HOW TO replace windshield wiper motor on 1987 1996 Ford F150 F250 F350
0helpful
1answer
0helpful
1answer
0helpful
1answer

My 1985 Ford Ranger was at a high idle all day at the end of the day in order for me to get home I had to keep one foot on the break & one foot on the Gas. When I got home and popped the hook there...

A bad PCV valve can also cause the dip stick to become unseated in the tube and is noticeble by oil being blown out of the tube, especially at high rpm's. You might want to check and see if the intake breather (usually on the other valve cover on most v-block engines) is not clogged as well.

or the pcv hose has a hole in it ! have a good day !
0helpful
1answer

Do not know how to read max or min on dip stick car is a 1998 mercury mystic 4 cyclender

there should be two lines on the dip stick or sometimes dots.the lower one indicates add oil and the upper one indicates full.anywhere in the middle is good when checked warm.make sure you check the level on a flat level surface and not an incline.you may have to clean off the bottom 3-4" of the stick to see the marks as sometimes the marks get too dirty.
0helpful
2answers

My engine oil dipstick is missing on my 1999 ford crown victoria 5.6 liter engine what is the length of it so i can get a universal one

GO TO ANY AUTO PARTS STORE TELL THEM YOU HAVE 1999 FORD CROWN VICTORIA WITH A 4.6L ENGINE.THEY SHOULD HAVE A UNIVERAL OIL DIP STICK FOR YOUR CAR.
0helpful
1answer

Chevy s-10 pick up truck ,158154, 4cyl engine, wont start

Milky substance on your dip stick indicates contamination in your engine oil, most likely coolant and that is an indication of head gasket, or intake gasket gone bad and coolant leaking into your oil system. Note that coolant in your engine oil is bad, coolant will corrode the internal engine's bearing causing you to replace or overhaul the engine. The engine not starting is most likely the result of being blown and will need to be replaced.
Thank you for using Fixya and god luck
0helpful
1answer

Where is the dip stick to check the oil in a 1988 toyota pick up?

should be beside the distributor a little below it on a 4cylinder , v6 same place just a little further back.
0helpful
1answer

1990 ford ranger xlt 2wd

oil? 4.5 qts i think should b in the center of XXXXXX on dip stick
Not finding what you are looking for?

166 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...