2006 jeep liberty code u1411 tell me how to fix it
Wow , no engine options stated, or type of driveline.... wow.
this is covered in the FSM, read that.
it states
U1411-Implausible Fuel Volume Signal Received
that means to get the car fully scanned,
using a real scan tool that sees all 2006, jeep DTC errors.
including BCM codes.
the manual tells you what to do.
here is just small expert from the Factory.serv.manual
quote
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - DIAGNOSIS AND TESTING)(Refer To List 1).
Theory of Operation
The BCM has to send the PCM a fuel volume signal over CAN C. The signal the BCM sends over CAN C is implausible.
Diagnostic Test
1. ACTIVE DTC
Ignition on, engine not running.
With a scan tool read DTCs.
Is the DTC active at this time?
Yes
No
Refer To List:
2. CAN C BUS DTCS ALSO ACTIVE
With a scan tool check for DTCs in the BCM.
Are any CAN C related DTCs active at this time?
Yes
No
--------------------------------------------------------------------------------------------
that word CAN , means the vehicle network communications buss called CAN.
if the PCM can not TALK to the BCM. this can cause the
data to be wrong. and the
Implausible , data.
greek ,huh,
get it serviced by any ASE shop in town or if desperate JEEP.
SOURCE: 2006 jeep commander check engine light coming on
implausible fuel signal i fould this at canobd2.com
SOURCE: 2006 jeep liberty
the drain plug is located on the back of oil pan in the center. if you have a rock guard you have to remove this first. the pcv valve(positive crankcase vent is located on either the left valve cover in front or on theif it's a v6 or 8 or it is located on the valve cover in the back in a straight six it will have a hose that goes to your air filter breather box or the breather hose. please rate this...........thanks
SOURCE: I have a 2005 Jeep Cherokee Laredo. Diagnostic
Implausible Fuel Volume Signal Received
This usually points to a bad PCM (powertrain control module).
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c
Testimonial: "Thanks so much."
SOURCE: Warning lights go on and off....2006 jeep commander
that code means the computers are not communicating
SOURCE: 2006 Jeep Commander 5.7L 4X4? code u1411 what dose that means
Google any codes you get
2006 jeep OBD Codes U1411
10,919 views
Usually answered in minutes!
×