A/c compressor clutch bearings went out
I checked and i couldnt find anyone that makes a bypass pulley for this model.
The a/c compressor can not be bypassed on this engine. The compressor will either need to be replaced or removed and a special bypass pulley installed in its place. The pulleys if available can be purchased from you local auto parts store.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
Testimonial: "it can be dune by removing the belt tentionr and with a 1/2 inch breaker bar, and a 060393 belt an a 19 or 3/4 socket witch is the same thing I have dune it. the belt diagram on this post is wrong. the power stearing belt is on the inside of the crank pulley"
Than the a/c compressor will need to be replaced. If your looking to save a little money a used compressor can be installed. You may run into issues with shops willing to install or charge the system with a used compressor.
×
SOURCE: replacing headlight bulbs on a 2006 chrysler sebring
Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.
SOURCE: need serpentine belt routing for 2006 chrysler
Hello Damon104.
The best way to help you with this question is to give you this site.
Dayco belts offers this and covers most makes and models.
www.mvreader.com/multiview/dayco/index.php?bgInterchange=1&l=n
I hope your repair goes well for you.
Kl
SOURCE: 2007 chrysler sebring serpentine belt diagram
Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.
SOURCE: I need a timing belt diagram for a 2005 chrysler sebring
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2005/make/chrysler/model/sebring/2005_chrysler_sebring_timing_belt_diagram_marks.htm
1,196 views
Usually answered in minutes!
×