Question about Cars & Trucks

1 Answer

Want the timing and cams and crank marks of the

Want the timing and cams and crank marks of the fiat strada 1.6 twin cam 16v.

Posted by Anonymous on

Ad

1 Answer

carlos falero

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Cars & Trucks Master
  • 1,327 Answers

No timing marks need special tools toperform this job

Posted on Sep 30, 2014

Ad

1 Related Answer

Patrick Rayome

  • 1757 Answers

SOURCE: timing marks on twin overhead cams 2.4 and crank mark.

Click on the following direct, Free Link. It has several Diagrams including the Timing Belt + Marks for your 2004 Hyundai Sonata 2.4L DOHC In-Line 4-Cylinder Engine (located on the bottom half of the Page on the Link). There are additional Diagrams that will prove to be helpful while you are doing this...

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Apr 16, 2010

Testimonial: "tHANKS, tHIS WILL DO THE JOB."

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install timing chain with timing marks both crankshaft and camshaft


Hellen, For the second time, Re POST year, make, model, engine size and complete question so we, here at fixya can answer your question effectively.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Still pulling hair Twin Cam timing marks How accurate Engine Exhaust...
16v fast tbelt swap
Twin cam 16 valve timing marks Google Search

Aug 11, 2016 | Cars & Trucks

1 Answer

I have a Fiat Strada 1.2 el bakkie. When starting the vehicle it swings but does not start. Can you advise what the possible issue


cam/crank position sensors
immobilizer issues
ignition control module
injectors nor working
low fuel/ no fuel pressure
run the fault codes to determine which of those need fixing

Jun 10, 2016 | 2006 Fiat Strada

1 Answer

What is the torque settings on a fiat strada 1.6 16v elx 2005 model for head and cams please


Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Jun 03, 2016 | Fiat Cars & Trucks

1 Answer

Camshaft valve timing marks for Fiat Siena 1.6 16V, 1995 to 2002 model


there are no timing marks for camshafts you need a fiat tool to lock the cams rear of engine but if you mark the cam sprockets carefully before you dismantle you should be ok if not borrow the fiat tools the crankshaft marks are on the front pulley end about @aprox.10oclock position

May 27, 2015 | Fiat Siena Cars & Trucks

1 Answer

Timing settings for 2006 petrol 1.6 16valve fiat strada


Hi the tdc mark sits on the gearbox side on the flywheel to get number 1 piston TDC for the cams you need locking tools that fits on the back sind of the cam boxes

Jun 07, 2014 | 2006 Fiat Strada 1.6

1 Answer

Taming daigraph of fiat strata 1.6 16v


#1 piston must be on the compression stroke top dead center

Apr 30, 2014 | 2006 Fiat Strada

1 Answer

Timing belt snaped on fiat palio 16v how do i find the cam marks


There are special tools you need to lock the cams in the correct position. Without these it is near impossible to get the valve timing 100% right. These locking plates fit on the opposite ends of the cam boxes from the cam gears and belt by removing the blanks on that end.
I managed to borrow a set and set it up correctly. I then made my own marks on the cam gears for future reference.

timing-belt-snaped-fiat-palio-16v-find-qdbodrihfgbojyt0cxubj1mu-3-0.jpg

timing-belt-snaped-fiat-palio-16v-find-qdbodrihfgbojyt0cxubj1mu-3-1.jpg

Apr 09, 2014 | 2005 Fiat Palio Weekend

1 Answer

Timing setting on fiat strada 1.6 elx 16v


year? just a hint?
and which timing, cam or spark.????????

Oct 16, 2013 | Fiat Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23504 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6499 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...