Question about 2004 Jaguar X-Type
Posted by Anonymous on
If you don't have access to a shop full of special tools like hoists, transmission jacks or can raise the car to a safe working height, then leave it to a pro. AWD's present a whole different set of problems if you're not an experienced mechanic.
Posted on Sep 24, 2014
Your key fob needs reprogramming, and yes the alarm will go off when you open the door, but you have enough time to put the key in the ignition which will prevent the alarm sounding. Car is usable until you get the fob sorted by locking and unlocking using the key.
Posted on Jun 11, 2009
If I am understanding your post, I believe you do have a levelling
system and it should be near your light switch on the dash. It is
the type of switch that you depress first, it then springs out and
you turn the small knob (just like your instrument panel lights
adjuster next to it.) What you do not have perhaps, if your car is
not fitted with HIDs (high intensity headlamps), is the automatic
levelling system which is a legal requirement when HIDs are fitted
due to the high power of the lights....
if you don't have a self-levelling system then you'll have a manual
system, operated by a knob under the light switch so that you can
adjust to compensate for a heavy load in the rear of the car.
Posted on Mar 27, 2010
Testimonial: "I did see the little knob on the dash under the headlight switch. i thought it was to dim the dash lights i will check it out and let you know. "
Before anything make sure you H1 bulb is seated correctly on mount (that the dimple on the bulb metal plate is in he hole of the mounting plate. When you remove the spring clamps for the bulb, turn the bulb slightly in both directions until you see it/feel it slide in and re-attach the spring clamps. Check if this resolved you adjustment. If it is still off, you will see a hole on top of the core support above the head lamp where inside you will see an allen head type plastic head with an optional Philips screw insert. That is one of your adjustment screws for vertical. There is one on each side. Behind the head lamp unit (between the low beam and high beam) you will also see a white plastic gear button. This is another adjustment screw for horizontal.
Posted on Jan 05, 2011
Tips for a great answer:
Dec 06, 2016 | 2002 Jaguar X-Type
Apr 08, 2015 | 2004 Jaguar X-Type
Nov 07, 2011 | 2003 Jaguar X-Type
Mar 02, 2011 | 2004 Jaguar X-Type
May 13, 2010 | 2002 Jaguar X-Type
Mar 30, 2010 | 2002 Jaguar X-Type
Nov 10, 2009 | 2005 Jaguar X-Type
Jul 31, 2009 | 2004 Jaguar X-Type
144 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: