Also says to check VSC system. All of a sudden the thing won't start
I googles the vsc system problem and it led me to a answer for both of them for the vsc and the shift to park it could be caused by the torque inverter/converter if you google "vsc problem?" You will find the Toyota nation website and they are talking about this exact problem in that forum that will come up.
SOURCE: The VSC and ABS lights
IT would be best to run a scanner and retrieve error codes if the computer detected any.
Try to reset the ECU by removing one of the battery terminals.
The solution may or may not be related to each other. This could be a speed sensor issue found on the front where your front drive shafts can be found. The cables may have come off or one may be faulty.
Reset the ECU again if the solution above did not work.
If solutions presented did not work, I strongly recommend to run a scanner to detect the error.
Thank you.
SOURCE: blower stopped working and vsc trac, check eng and vsc off lights all came on and won't go out
check the blower speed control switch and motor connector
SOURCE: 1997 Camry Won't shift into overdrive
look for knock sensor codes in the history on the engine computer
2,348 views
Usually answered in minutes!
The error messages were caused by a run down battery. The car door had been left ajar all night. Jumped it and all is good.
×