4 way flashers don't work
Hi,
If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.
Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
SOURCE: location of fuses for 97 geo metro
It's either under the dash by your left knee or down on the drivers side kickpanel.
SOURCE: turn signal don't work or the flashers?
If you still have flasher problems, I read on Google to spray WD-40 down in and around the hazzard flasher button, then press it up and down several times...and BINGO...all flashers and signals worked again....just had some dirt and dust in the wiring....
SOURCE: where is the flasher relay located for 1998 Toyota 4- Runner
Toyota Pick-ups, Land Cruiser, and 4 Runner 1997-00
Flashers -REPLACEMENT
The turn signal flasher
is usually located in the convenience center, under the dash, on the
left side kick panel. In all cases, replacement is made by unplugging
the old unit and plugging in a new one.
Hope helped with this (remember rated this help) Good luck.
56 views
Usually answered in minutes!
×