SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
SOURCE: 1990 Toyota Camry transmission won't go into any gear
you didn't make clear you have a automatic trasmission or manual?
if is a manual trasmission you have to look the clutch and to valves that is puting the trasmision oil pressure to move the clutch one at the end near the gear box and the second after the clutch pedal outside of the cabin imediatley after the pedal. you have to look to the oil level in the rezervoir, if you dont have the problem to bay some oil and to change completely the oil first maybe the right solution to begin with oil change first , may be is freeze from the dirties finded in the oil pipes and valves.
if you have the automatic trasmission sorry i dont know, because the problems there are more complex.
SOURCE: how to replace timing belt in 1990 toyota camry
It would be to hard to tell and show you over the computer.
The best way for you is to buy a Chilton manual for your car at the autoparts store. The book runs about $20
This book is a do-it-yourself bible. It will show you everything you need to know on how to do maintenance and repair on your vehicle.
SOURCE: what r the symptoms of a ball joint needing to be
You will have play in the steering
and the ride a tad rougher. but you can look at them if they are busted or when you greese the grease leaks through cracks.
89 views
Usually answered in minutes!
×