We checked the fuses, and the bulbs, however, the abs light keeps coming on, and the brake lights, will not work. This happened, after I hooked up a car hauler. At first all the lights quit working,. I replaced fuses, and the rest seem fine, but still no brake lights.
It sounds like you might have a broken wire somewhere if you have no back brake lights.
Testimonial: "Is there any tricks or short cuts, I can take, to figure out which it may be, as I cant afford a lot to have it serviced?"
No there is really not. But i would double check the fuses, and look under the truck to see if you have any broken or loose wires. It could also be a bad ground somewhere.
Good Luck.
Thank you
×
SOURCE: abs light on
I'm a Ford service adviser. There are many reasons for the
abs warning indicator to come on. The usual cause is from a
faulty speed sensor. Either a wheel speed sensor or the
differential speed sensor. I don't think the light is related to your
vandalism. You might want to take the truck to an auto parts store and
have them read the codes for you. Most auto parts stores will do this
for free.
Good Luck
SOURCE: 2001 ford windstar speedometer doesnt work or trac controle
hello i think it is the speed sensor because it operates the speedometer and this why the abs lights came on i had the same problem it should work.
SOURCE: ABS light on 2003 ford explorer stays on
It could be a wheel speed sensor. have your brakes inspected. good luck
SOURCE: brake switch fuse keeps blowing
I Have the same problem with my 97 ford keeps blown fuse 15 amp,when I step on the brake pedal,to shift out of park it blows the fuse.can someone help me out what to look for.I replaced the switch on brake pedal that wasn't it.
SOURCE: 1995 ford taurus no speedometer, abs light, won't shift correctly
speed sensor needs replaced
931 views
Usually answered in minutes!
×