Question about 1992 Buick Century

1 Answer

Location of ECM and how to change ECM.

Installing a ECM in a Buick Century.

Posted by joseph sellars on

Ad

1 Answer

Denis Houle

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 1,413 Answers

Passenger side Under dash on the side kick pad with 3 connector
To replace it .. unplug battery then remove connector at ECM on old ecm remove two screw and the plate remove both memory and install them in the new ECM....plug 3 connectors and battery cable

hope it help

Posted on Dec 12, 2014

Ad

5 Related Answers

c17hydro

Greg Bernett

  • 2989 Answers

SOURCE: flasher out on buick and cannot find location to replace it

Open access panel directly under steering column, pull off flasher unit (metallic cylinder) take to auto parts store (no more than 10 bucks) , put on new one, drive safe.

Good Luck and please don't forget to rate!

Posted on Mar 16, 2009

Ad
bunnydawg

Roberta Smith

  • 5158 Answers

SOURCE: Where is the ECM located on an 1989 Buick Century Custom V6 3.3 l

unhook the battery for about 15 minutes... that will reset it ... if the stereo is an anti theft type... make sure you know the code and how to enter it.

Posted on Mar 18, 2009

honeymokey

honeymokey

  • 3113 Answers

SOURCE: location of the starter on the engine

follow the positive + cable from battery to the starter.

Posted on Apr 19, 2009

csmock132

Clint Smock

  • 4669 Answers

SOURCE: 2001 Buick Century shift solenoid

It is in the side cover on the valve body. The transmission needs to be removed to access the solenoids.

Posted on May 18, 2009

Anonymous

  • 240 Answers

SOURCE: 1988 buick century headlights

To change the low beam headlight on the 2001 Lesabre, the headlight assembly must first be removed from the car. It is really quite simple to do. There are two bolts on the top of the assembly that must be removed - that is all! The entire assembly comes out and gives easy access to the low beam bulb. Give it a 1/4 counterclockwise turn to remove it. Plus in the new one (#9006) and reverse the procedure.

Posted on Jun 19, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE IS THE ECM LOCATED


passenger side behind dash , i've copied a schematic , hope fully it will load, also known as a PCM

2002 buick century ecm location Google Search

Apr 10, 2015 | 2002 Buick Century

2 Answers

How to replace ecm on 1993 buick century?


remove knee bolster on the passenger side and find the ecm under the dash behind the glove box. some of these you can remove the inner glove box to give you more room. it is held in a bracket that you will have drop down and unbolt the holding fasteners that hold the ecm in the bracket then disconnect the plug connectors to the ecm.

Aug 05, 2014 | 1993 Buick Century

1 Answer

Where is the ecm located on a 1993 buick century. 3.3 6 cyl.


Under the dash on the passenger side. If there is a panel underneath, a sound insulator, the ecm will be visible with the panel removed. On some, the glove box has to be removed, don't know about a century, but on a Lesabre, you just remove the panel under the dash and the ecm is accessible.

Jun 28, 2014 | Cars & Trucks

1 Answer

87 Buick century...3.8 well maintained...had in garage for a month...all sensors have been verified..bought new computer and used old proms..still no resolve...finally took to dealer and they said a bad...


I doubt the ECM from a C body would work on your Century. I would probably buy a used computer and prom from a car exactly like yours. The prom is calibrated to the body style, engine, and trans. Each year and model can be different due to emissions standards.

Jul 11, 2013 | Cars & Trucks

1 Answer

What is a IAT on a 2000 buick century


It is the intake air temperature sensor, it mesures the air temperature
for the engine computer ECM

Jul 19, 2012 | Buick Century Cars & Trucks

1 Answer

Can you tell me where the ecu is located on a 96 buick century


The ECM is located under the glove compartment in GM cars from the 1990s.

Oct 08, 2010 | 1996 Buick Century

1 Answer

Engine hi engine diagnose lite on scantool


ay chek all the ground wires that go to the ecm
chek alterneter and battery
chek ignation module and the knock sensor
every won was good
than ay change the ecm and the problem is over

Jun 20, 2009 | 1993 Buick Century

1 Answer

Computer reset


Disconnect the battery negative cable for approx 15 min. This will reset the ecm (engine computer) and the adaptive fuel strategy.

Mar 29, 2009 | 2000 Buick Century

1 Answer

Where is the ECM located on an 1989 Buick Century Custom V6 3.3 l


unhook the battery for about 15 minutes... that will reset it ... if the stereo is an anti theft type... make sure you know the code and how to enter it.

Mar 18, 2009 | 1989 Buick Century

Not finding what you are looking for?
1992 Buick Century Logo

589 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...