Replace rear axle seal on a 2000 ford mustang
FOLLOW INSTRUCTION IMAGE
1-SPARE PARTS NUMBERS.
2- CON.....
5- INSTALLATION.
Sorry pics show as thumpnails u can see
here
×
SOURCE: Rear Axel Seal
Wheel, brakes etc that are in way of pulling axle out have to come off. Drain rear end fluid, remove rear housing cover, remove bolt that holds pin in differential, remove differential pin, push in slightly on axle to remove "U" clip that holds shaft in, then slide shaft out. replace seal. Reverse procedure for re-install & fill with gear lube. If any questions, get back to us.
233 views
Usually answered in minutes!
×