Question about Toyota Previa

Open Question

<!-- from fixya rte -->Como sustituyo sensor AFS toyota previa 2009 - Previa Toyota Cars & Trucks

Posted by Anonymous on

Ad

3 Related Answers

Anonymous

  • 68 Answers

SOURCE: Where is the brake load sensing valve on a Toyota Previa and where is it.?

brake load sensor valves are normally mounted on either the diff or the body above the rear axle
they are designed to open or close, depending on how much weight you are carrying, and let more or less oil to the back brakes

Posted on May 05, 2009

Ad
mickha2

Michael Khait

  • 145 Answers

SOURCE: need to know toyota previa cranks sensor

behind crank pulley

Posted on Aug 17, 2010

Ad
emissionwiz

Marvin

  • 85239 Answers

SOURCE: where is the ect sensor on a 1995 toyota previa

There are three temperature sensors on a 95 Previa engine. They are located on the left front side of the engine. The lower one is somwhat accessable from under the vehicle but access to the other two will require removal of the passenger seat and the access cover under the seat.

Read more: http://wiki.answers.com/Q/Where_is_the_temperature_sender_or_temperature_sensor_on_a_1995_Toyota_Previa#ixzz25j6FLDP8

Posted on Sep 06, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The compression is the same for all cylinders(150), but when I turned motor over, water came out of #1 cylinder only. Any idea?


Toyota Previa Questions - 93 toyota previa having white ...

www.cargurus.com > Questions > Toyota > Previa

CarGurusMar 17, 2013 - 93 toyota previa having white smoke while starting and stu-off while running on the road. ... Lift the cylinder head off the engine block and move to oneside. Remove the ... 1992 Toyota Previa 3 Dr LE Passenger Van ... was going down the road one day and it just shut off. it will turn over but wont crank.Missing: water

Rough idle, bad hesitation on acceleration, perfect idle with ...

repairpal.com > Questions > Toyota > Previa > 1994 Toyota Previa
1994 Toyota Previa Questions ... Idle is perfectly smooth for first 1 - 2 minutes after overnight cold start, before .... This may be because the throttle position sensor is signalling just off idle. .... My check engine light came on with PO-420 code. ... theengine was turning over under starter motor that would bring the engine to an ...

Re: Replacing a Previa head gasket. - ToyotaVanTech

www.toyotavantech.com > Forum > Technical Discussion > Toyota Previas

Dec 3, 2011 - 20 posts - ‎2 authors
Okay, so you've got a Toyota Previa with a blown head gasket. ... The next few pix are taken after dropping the engine out from the bottom using a ... You can see a definite path between the water jacket and the cylinder. ... I believe this was a result of #1blowing and over pressurizing the cooling system.

How to Change a Coolant Temperature Sensor - YouTube

? 26:00
https://www.youtube.com/watch?v=IXSp5ykI6po
Sep 16, 2012 - Uploaded by rehma6b0

Jan 21, 2016 | 1992 Toyota Previa

1 Answer

AFS OFF


Hola mi lexus is 350 le prendi? la luz del AFS como le hago para apagarla

Mar 31, 2014 | 2007 Lexus GS 350 AWD Sedan

1 Answer

Where is the ect sensor on a 1995 toyota previa


There are three temperature sensors on a 95 Previa engine. They are located on the left front side of the engine. The lower one is somwhat accessable from under the vehicle but access to the other two will require removal of the passenger seat and the access cover under the seat.

Read more: http://wiki.answers.com/Q/Where_is_the_temperature_sender_or_temperature_sensor_on_a_1995_Toyota_Previa#ixzz25j6FLDP8

Sep 04, 2012 | 1995 Toyota Previa

1 Answer

Where is located the cam position sensor on a 94 Toyota previa?


up to 1994 Previa's the cam sensors are located in the distributor, there is one for each cam. labeled G1 & G2 which are the center 2 of the 4 wires to the distributor, if you want to test them first.
Also, top wire is crank sensor, bottom is ground.

I believe you will have to replace the whole distributor.

Nov 13, 2011 | 1994 Toyota Previa

3 Answers

Where are location crankshft sensor??


DISTRIBUTOR IS THE CRANKSHAFT SENSOR.

Aug 25, 2011 | 1992 Toyota Previa

1 Answer

TOYOTA PREVIA 1991 2400 CC THE SIGN OF OPEN DOOR


The door afar sensors are located in the door latches. Try spraying all the door latches with wd40 penetrating oil and see if that helps.

Jan 09, 2011 | 1991 Toyota Previa

1 Answer

Where is the brake load sensing valve on a Toyota Previa and where is it.?


brake load sensor valves are normally mounted on either the diff or the body above the rear axle
they are designed to open or close, depending on how much weight you are carrying, and let more or less oil to the back brakes

May 04, 2009 | 1992 Toyota Previa

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...