Question about 2003 Buick Regal

Where is the ABS module located on a 2003 Buick

Where is the ABS module located on a 2003 Buick regal .

1 Related Answer

Anonymous

1 Answer

SOURCE: signal bulb on 2003 buick regal

To change front turn signal –
open the hood; look in back of headlight; two white clips; pull straight up, and then whole headlight comes out including turn signal; it is all one unit; remove rubber cover, then you take bulb out of unit. Mechanism that bulb fits in will need to be turned clockwise (looking from the front) and pulled to get it out of the larger unit holding all lights. Be sure and put rubber cover back on before re-inserting the two white clips.

Posted on May 07, 2009

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Where is the headlight relay found in a 2003 Buick Regal

try this

Jun 03, 2014 | 2003 Buick Regal

1 Answer

Why does my 2003 buick regal ls stop ideling afer it warms up?

The automatic idle control valve may have stopped working or the control module that operates it.

May 17, 2014 | 2003 Buick Regal

1 Answer

Buick regal abs light stays on

Sensor in hub bearing is bad

Apr 27, 2014 | 1998 Buick Regal

1 Answer

Buick Regal 2002 Track off and ABS lights on dashboard are on.

possible bad wheel speed sensor not reading same speed as others making brake control module believe you have a wheel slipping and falsely enguaging tracksion control. You need a scan tool to view all wheel speeds at the same time to diagnose.

Mar 29, 2014 | 2002 Buick Regal

1 Answer

Location abs module ebcm

This is at the front left of your car. If you pop the hood, and look down kinda under the air filter box, you should see it. To work on/change it, I found it easiest to jack up the drivers side of the car, remove the drivers front wheel, then I think I took out the inner fender, or somehow I could see into the module. This gave me enough room to change it.

Apr 27, 2013 | 2002 Buick Regal

1 Answer

Can someone please tell me where the ignition control module is on a 91 buick regal?

The ignition control module is usually located Under the coil packs when you remove the coil packs the ICm will have 2 male connectors for each coil

Oct 15, 2012 | 1991 Buick Regal

1 Answer

On my 1998 buick regal the front passenger caliper has locked up, replaced caliper and brake line. pressure won't release unless you open bleeder. could it br proportioner valve?

Hello: It sounds like the ABS unit is stuck. (I have experienced this) You will have to replace the hydraulic part of the system. (not the module) After replacement you will have to have the system "HOMED" which will require a GM Tech 2 to do it. The proportioning valve is part of the ABS unit.

Aug 15, 2011 | 1998 Buick Regal

1 Answer

Replaced wheel bearing assemblies on front with abs sensors. Wiring connectors appear to be ok. But the abs service vehicle soon and trac off lights come on when you put the vehicle in gear. What could be...

bad wiring to the wheel sensors which were indicated to be replaced by the ABS Brake Scan tool.

or

A faulty ABS Brake Module.

Jul 05, 2010 | 2003 Buick Regal

1 Answer

Where is the abs pupm located on buick 2000 ls

THE 2001 ABS SYSTEM HAS HYDRAULIC MODULATOR MOTOR PACK ASSEMBLY MOUNTED ON THE SIDE OF THE MASTER CYLINDER..

Feb 28, 2010 | 2001 Buick Regal

1 Answer

2000 buick regal, abs studdering noise.

If you are braking hard and one or more wheels lose grip, the ABS system will modulate brake pressure in pulses to the slipping wheels. That is a normal feeling when this is happening. If you have a pulsation under light braking, it is likely that you have brake rotors that are no longer true and and need to be replaced or machined.

Mar 07, 2009 | 2000 Buick Regal