2004 GMC Envoy Logo

Related Topics:

A
Anonymous Posted on Sep 06, 2014

How to fix low beam lights

Low beam head light is not functioning

5 Related Answers

Anonymous

  • 6 Answers
  • Posted on Feb 25, 2009

SOURCE: change head light

You should be able to reach under the hood into the headlight assembly and grab the bulbs and twist them off if not then you have to take off your entire headlight assembly then take the bulbs out.

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 02, 2009

SOURCE: 2008 gmc acadia low beam light bulb changing

how do you change the low beam light bulb on the 2008 gmc acadia

Anonymous

  • 708 Answers
  • Posted on Oct 05, 2009

SOURCE: LOW BEAM HEADLIGHTS DON'T WORK FUSES ARE GOOD AND

If you are handling the bulbs with your bare hands that is why your bulbs keep blowing out. use a washcloth to put the bulb in or rubber gloves, anything that will keep your hands from touching the bulb.

Anonymous

  • 2702 Answers
  • Posted on Oct 24, 2009

SOURCE: daytime running lights work daytime/no low beam at

its likley to be the head light censor

duane_wong

Duane Wong

  • 6826 Answers
  • Posted on Jul 08, 2010

SOURCE: Low beams stopped working but all other lights work

Need to have an electrical shop determine what is wrong.

It could be a fuse for the low beam headlamps that has blown,
or a relay has been overheated.

Check that the bulbs for the low beam aren't blown out, possibly
simultaneously.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a 2012 Kia sorento, both low beam lights went out

Hello Jose it could be as simple as replacing the low beam head light. These light bulbs burn out.
0helpful
2answers

How do I fix problem with my right side low beam headlight on 2007 jeep Liberty

Check the wiring on that light. Also check the bulb with a couple of wires to the battery, or swap the bulb left to right to make sure the new bulb is okay.
1helpful
1answer

No Low beam head lights and no turn signals or hazard lights. Already changed the multi function switch. What to look for next?

When you had the wiring loose for multifunction switch, if possible, knowing what color wire did what, using wiring diagram, I believe you could have used jumper wire to bypass multifunction switch to see if this or that system would work, if it doesn't, the multifunction switch probably wasn't the problem. On older vehicles it was probably easier to do something like that. Could be issue with wiring in steering column or clock spring, where applicable.Your low beam from dimmer switch goes through drl relay, with relay not energized. At the low beam head lamp, tan wire is voltage, black wire is ground.
0helpful
1answer

2005 ford sports trac. How do you get to head

Its not a relay, have your multi function switch checked out
1helpful
1answer

2006 Chevy HHR low beams do not work in auto or on positions. However, low beams flash when locking/unlocking the car using the remote. Also, high beams, parking lights, and turn signals all work fine. All...

Your running lights which come on when you are in drive should be the ones flashing when you use the key FOB to lock or unlock vehicle not your head lights. Although unusual maybe both low beam head lights are burnt out or a bad ground, that the only thing that makes sense to me.
0helpful
1answer

My head lights only go to high beam both positions give me hi beam no low beam

a faulty multi function switch...the milti function switch is the lever u pull to go from low to high...an to turn on the lights
0helpful
1answer

On my 2000 VW Beetle the low beams and day time running lights are not working but the high beams are....what could the problem be and how do i fix it?

high and low beam control by the handle S.W . this case some time it;s short togther making load on the handle s.w , it;s mark on wire and socket touch with head light bulb same mult the nutral.need to replace head lights control handle s.w . check head light bulb for short (high/low)
0helpful
1answer

Ford 2003, F250 Desel, 7.3 Liter Head lights

first thing i would check is the wiring were the plow wiring is spliced in at this is most likly the culprate. or you may have a bad multi function switch in the steering column
1helpful
1answer

Low beam on right side not functional

just the head light bulb, it has too filament one for high and one for low the low beam filament is burnd out so replace the bulb
6helpful
4answers

Low beam headlights do not work, but high beam headlights do

Clyde,

I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.
Not finding what you are looking for?

27 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...