Question about 2010 Buick Enclave
When I open any of the doors on my 2010 Buick enclave my lights do not come on
Posted by Anonymous on
The dome light is on a separate fuse since the dome light is one of the few lights that are connected to the battery even if the key is off.
There are usually two relay/fuse boxes
One under the hood on the drivers side near the firewall.
The other place is under the dash to the left of the drivers knee.
Hope this helps.
Posted on Mar 06, 2015
make sure the dome override switch is depressed. The switch is located just above the rotating knob which dims the interior ligthts. The dome overide switch is located just to left of the steering column.
Posted on Oct 28, 2010
The easiest place for you to tap the Dome light power would be at teh fuse panel where the fuse is located. The ground for that to work is the little switch in teh door jam near the hinges. The problem you may run into is the dome light coming on when you activate the switch to turn those LED lights on. Your going to tap the power wire direct and put the switch to turn them on controlling the ground unless you want them to work at the same time the dome light does in which case I would tap the power line direct and then run an additional wire to tap the switch in the door. A better option, at least to me, would be to tap power off the lighter circuit and control that with the switch then you could ground anywhere you have a good ground.
Posted on Sep 22, 2011
Tips for a great answer:
Dec 20, 2016 | 2010 Buick Enclave
Sep 28, 2015 | 2008 Buick Enclave
Sep 04, 2015 | Buick Cars & Trucks
Sep 06, 2014 | 2010 Buick Enclave
Jan 10, 2011 | 2009 Buick Enclave
Oct 27, 2010 | 2009 Buick Enclave
Jan 27, 2010 | 2009 Buick Enclave
259 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: