How to adj transmission on 96 manual eclipse ?

Turn [SEL] button to select CLOCK ADJ.

Press the [SEL] button. The clock adjustment mode is activated. Turn [SEL] button to display the item to be selected for adjustment. Hours, minutes or exact hour will be switched each time the button is turned.

Press the [SEEK /FAST ] button. [SEEK ] button: Turns the time forward. [FAST ] button: Turns the time back. To set the clock to 0 minutes, 0 seconds (an exact hour), press the [SEEK /FAST ] button.

For example: At 3:29: Pressing the [SEEK /FAST ] button returns to 3:00. At 3:30: Pressing the [SEEK /FAST ] button advances to 4:00.

Press the [RTN] button. At this time, other adjustments can also be made in Function Mode. 6 Press the [FUNC] button to exit Function Mode.

Also, you can read the manual here:
http://www.eclipse-web.com/us/download/manual/manual/pdf/CD3414(1-1455A).pdf

If your trying to adjust your alternator belt, you have to loosen all the lockdown bolts before you can adjust the alternator. When you get the right tension on the belt, tighten the lockdown bolts.

I need accurate torque specifications for rod and I need accurate torque specifications for rod and main bearing caps for a 2.0 liter eclipse turbo 90 help plis

you need to use 10w-30 oil. i recomend valvoline durablend ($20 for a 5qt jug at walmart) or valvoline synpower.
i have most if not all of the service manual for the 2g eclipse on mediafire.com. HERE is the link.
the 97-99EBC and the 97-99electrical should have just about everything.
the 97-99 year models are almost exactly the same as the 95-96. for the most part all the differences are cosmetic (front/rear bumpers, side skirts, rims, headlights, foglights, a/c switch, radio/cd)

If you have a manual transmission/non-turbo, the fluid fill plug, which is rubber, is located on the drivers side at the top of the transmission on the side facing the tire.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

did you change fluid and filter this is just as important as an engine oil change. also a automatic transmission has things called bands that change the gears and hold overdrive in they also need adjusting every 30,000 miles. if not they will cause your transm,ission to slip. and burn up atf fluid.

If you send me your email address, I will send you the wiring diagrams for you car. [email protected]

can u tell me what the code number is ?

I can't find any reference to an adjustment in the overhaul manual, so i will assume this means no adj ness. or provided for.

sounds like the immobiliser ,