Power steering on Peugeot 307 not working.where do

you will need to have steering motor replaced. $$$

Test charging circuit (usually for free at parts store). A battery getting drained can cause much of this. With car sitting still you could try removing fuses one at a time to see if there is an unusual draw.

If it's the electrical motor type of pump, you must connect to a full scale scanner like Lexia 3 to get it reset.

It's defiantly the power steering system Sorry too tell you but it's about $1500 to replace It took extra cash or me to find out through lots of mechanics but in the end found this and fixed the issue

hi.

i have never heard of a bleed nipple on power steering.

you just turn the wheele from full right lock to full left lock and back a few times and the system bleed itself.

if there is still a problem after doing this, then it suggests a fault in the compressor, or the rack itself.

It is always best to have a mechanic look at your car. It can be numerous problems and only by looking at the car can you truely detect whats wrong.

But with a little bit research, the 307 uses an electric hydraulic power steering. So it sounds like it will draw power from your car battery. If your battery isnt fully charged or getting enough power to everything in your car, your powersteering could not work. Does it just not work all together? or is it come and go?

Or you could need a new power steering system. As i said it is best to get a mechanic to actually look at the car.

but did you buy it new? if yes you need to go to a peugeot dealer to have programmed, if not and broken you have to replace it if you want to be sure disconect the cable from power steering motor and you will find all full of oil ciao

make sure you bleed it well lock steering left and right and hold to make sure all pipe are full pf fluid and top up power steering

check power steering fluid in engine bay

electric pump or engine driven