Question about 1987 Toyota Camry

3 Answers

Low beams don t work but high beams work

Both rt and lft headlight fuses are good. Relay as good,switched with fan relay. Relay still clicks and running lights come on when switch to low beams still no low beams.

Posted by Michael Songer on

Ad

3 Answers

gewald

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

What makes you think the lamps are good?

Posted on Apr 03, 2015

Ad

danoyachtcap

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 2,907 Answers

Low beams are on a different fuse and diff relay than the other lights.
Hope this helps.

Posted on Apr 03, 2015

Ad

Lawrence Murphy

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 37 Answers

Low beam bulb quit

Posted on Aug 27, 2014

Testimonial: "Both headlights went out at the same time"

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: Headlights

I READ ONLINE THAT THERE WAS A RECALL ON THIS YEAR AND MAKE, CHECK WITH TOYOTA WEB SITES TO RECTIFY YOUR PROBLEM

Posted on Jul 25, 2008

keemo68

Ronald Mueller

  • 1263 Answers

SOURCE: Headlight 2004 camry

your module in the steering wheel is faulty you should get it replaced. you can purchase it at ie Napa for alot less than through a dealer.

Posted on Sep 01, 2008

Anonymous

  • 1 Answer

SOURCE: Low beam headlights don't work

I know this is not your problem, but my low beam stopped working, both bulbs failed, no burn marks or broken element. Just had to tell someone

Posted on Mar 24, 2009

ourhowse

Dar

  • 2007 Answers

SOURCE: 2001 Toyota Corolla high beam lights are not

Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.

Posted on Jul 23, 2009

Chris Wood

  • 14 Answers

SOURCE: camry headlights not working

it sounds like a bad light switch

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights will not come on 02 s10


Have you checked fuses ? The Instrument panel fuse block , Fuse Block - I/P
LH of the I/P, near the door jamb switch - LF , fuse # 7 HDLPSW 10amp.
In the underhood fuse / relay box - Headlamp power relay , RT HDLP fuse 15amp LTHDLP fuse 15amp.
Battery positive voltage to the headlamp switch is supplied by the HDLP SW fuse in the IP fuse block. When the headlamp switch is in the HDLP position, the headlamp power relay coil is energized. A voltage signal is also sent to the body control module (BCM) signaling that the headlamp switch is activated. The headlamp power relay coil is grounded at G102. When the headlamp power relay is energized, the relay supplies battery voltage to the LT HDLP and RT HDLP fuses. Both low beam headlamps are grounded by the multifunction headlamp dimmer switch in the low beam position through the normally closed headlamp grounding relay in the body relay block to G200.
High Beams-Except ZR2 Battery positive voltage to the headlamp switch is supplied by the HDLP SW fuse in the IP fuse block. When the headlamp switch is in the HDLP position, the headlamp power relay coil is energized. A voltage signal is also sent to the body control module (BCM) signaling that the headlamp switch is activated. When the headlamp switch is in the AUTO or PARK position and the ambient light sensor detects darkness, the BCM produces a voltage signal that will also energize the headlamp power relay. The headlamp power relay coil is grounded at G102. When the headlamp power relay is energized, the relay supplies battery voltage to the LT HDLP and RT HDLP fuses. The RH high beam headlamp receives current directly from the RT HDLP fuse. When the headlamp switch is in the HDLP position, the BCM removes the ground path to the headlamp grounding and DRL relay coils. This allows current to flow to the LH high beam headlamp through the normally closed contacts of the DRL relay. Both high beam headlamps are grounded by the multifunction headlamp dimmer switch in the high beam position through the normally closed contacts in the headlamp grounding relay to G200. A ground signal is also sent to the BCM in order to confirm high beam operation.

In the i

Mar 01, 2015 | Cars & Trucks

1 Answer

I need a diagram for a 2001 VW Cabrio relay. I thought number 6 was for the blinkers/hazards but it's not and its empty. 413 is in there and blinkers and hazards just stopped one day. I don't know if I...


A2Resource
a great vw resource site
25345733-zc0klvszlbpkidh1d23fhked-5-0_0.gif
Relays:
Num.Relay Arrangement and Pinout (with control number stamped on relay)
1A/C Relay (13 or 140)
1A/C Switch
2Radiator Cooling Fan
3Fan Switch High Speed
4Battery, Fuse 23
5A/C Clutch (via pressure and temperature switches)
6Main Fusebox Battery Power, Fuse 19
7Main Fusebox Ground
8Fresh Air Fan
2Rear Wiper Relay (72)
1Main Fusebox Ground
2Main Fusebox Run Power, Fuse 4
3Rear Wiper Motor
4Wipe/Wash Signal from Switch
3Digifant Control Unit (30 or 32), Motronic OBD1 Control Unit (109)
1Main Fusebox Ground
2Tachometer
3Main Fusebox Start/Run Power
4Main Fusebox Battery Power
5To ECU (relay ) (1990 G60, ABA/VR6 OBD1 only)
6To ECU and Engine Electronics
4Load Reduction Relay (18)
1From Ignition Switch Run Power
2To Main Fuse Box Run Power
3Main Fusebox Battery Power
4Main Fusebox Ground
5Low Coolant Level Control Unit (43)
1Main Fusebox Start/Run Power
2Low Coolant Level Sensor
3Coolant Temperature Sensor, Gauge
4Main Fusebox Ground
6Flashers (21)
1Main Fusebox Ground
2Flasher Output
3Flasher Input/Power
4X/6 (Trailer Light)
7Headlight Washer (33)
1Main Fusebox Ground (B/4 to C/3 to Ground)
2Headlight Washer Pump
3Headlight Switch Pin 56 (headlights) (B3 to D4 to light power)
4Main Fusebox Battery Power (B/5 to Y/2)
5Windshield Washer Pump (B/1 to B/2 to washer pump power)
8Wash/Wipe/Intermittent Relay (19 for standard relay, 99 for variable intermittent module)
1Main Fusebox Ground
2Intermittent Switch
3Main Fusebox Run Power, Fuse 5
4Park/Low Signal (ground when parked, positive when on low speed)
5Wiper Motor Low Speed Output
6Wash Switch (positive for front wash)
9Seat Belt Warning Control Unit (4 or 29)
1Main Fusebox Ground
2Seat Belt Switch
3Door Switch
4Seatbelt Light
5"Key In" Power from Ignition Switch
6Main Fusebox Start/Run Power
7Automatic Shoulder Belt Controller
9Radio/Lights Buzzer (36)
1Main Fusebox Ground (not used)
2A1/4 (Left Parking Lights)
3Vehicle Speed Sensor
4Seatbelt Light (not used)
5"Key In" Power from Ignition Switch
6Main Fusebox Start/Run Power (not used)
7A2/2 (Right Parking Lights)
10Fog Light Relay (110 for fog lights with low beam headlights only, 53 for parking light/high beam fog lights)
1Parking Light Power
2Headlight Switch Headlight Power (Low/High)
3Fog Light Switch Power, Fuse 10
4Main Fusebox Battery Power
5Main Fusebox Ground
6Low Beam Headlight Power
11Horn (53)
1Main Fusebox Start/Run Power
2To Horns
3Main Fusebox Ground
4From Horn Button
12Fuel Pump Relay (80, 67 or 167)
1Main Fusebox Starter Power (not used)
2Main Fusebox Start/Run Power
3To ECU (Fuel Pump )
4To Fuse 18, Fuel Pump, Oxygen Sensor Heater
5G2/6 (not used)
6Main Fusebox Battery Power From 30B
7G2/7, T1 (not used)
8Main Fusebox Ground (not used)
9M/4, U1/8, G2/5 (not used)
12Glow Plug Relay (102 or 104)
1Main Fusebox Starter Power
2Main Fusebox Start/Run Power
3Engine Temp Sender (preheat)
4Glow Plugs (Z1)To Fuse 18 (not used)
5G2/6 (not used)
6Main Fusebox Battery Power From 30B
7G2/7, T1 (not used)
8Main Fusebox Ground
9Water Separator, Glow Plug Light

remember to check out the website below for more help
http://www.xjamiex.com/mk2resource/electrical/CE2.html

Dec 30, 2014 | Cars & Trucks

2 Answers

2006 Chevy Trailblazer low beam headlamps will not work. Here's a list of what I have done. Changed both low beam headlamp bulbs Swapped cooling fan relay and HDM relay -headlamps worked but cooling fan...


Hi Ryan, check the fuse to the low beam, if your not getting power to the relay it will never work, the fact that you have 3 new relays they can't all be duff

Aug 30, 2014 | Cars & Trucks

1 Answer

2003 sunfire ..... low beams were working one minute ,shut off car for two minutes got back in car started it ,now i have no low beams or fogs.i checked bulbs and fuses both are good , could it be the DRL...


Headlamps
The headlamps are operated when the driver places the headlamp switch in the HEADLAMP position. The LT HDLP and RT HDLP fuse in the IP fuse block, supply battery positive voltage to both the left and right headlamps. The low beam and high beam circuits continue to the headlamp switch. Depending on the position of the dimmer switch, either the low or high beam circuit will now have a path to ground. Ground is provided at G204. The low beam and high beam circuits also provide the body control module (BCM) with both low and high beam inputs. The headlamp switch includes the dimmer and the flash-to-pass switch.
If the headlight switch is left in the HEADLAMP position, the headlights will remain on until turned off or the battery runs dead.
Daytime Running Lamps (DRL)
Any function that turns on the headlights will cancel the daytime running lamps operation. The LT HDLP fuse in the IP fuse block supplies battery positive voltage to the daytime running lamp (DRL) relay coil circuit. The DRL relay switch contacts are connected to the low beam circuit. When the headlamp switch is placed in the OFF position, the BCM will turn on the daytime running lamps. The BCM energizes the DRL relay, closing the switch contacts and grounding the low beam circuit at G204. The DRL illuminate the low beam headlights at a reduced intensity. The DRL will operate when the ignition switch is in the RUN position, the gear selector is not in the PARK position and the parking brake is released. When these conditions have been met the DRL will illuminate.
DRL operation in Manual Transmission equipped vehicles will occur when the ignition switch is in the RUN position, and the parking brake is released.

Probably the dimmer switch . But without testing that would be just a guess . Turnning the headlamps on Any function that turns on the headlights will cancel the daytime running lamps operation..
No ,don't think the DRL relay has anything to do with it .

View wiring diagrams an testing the electrical circuits at the dimmer switch would be the proper way to diagnose .

Mar 06, 2018 | 2003 Pontiac Sunfire

1 Answer

2002 Escalade, headlights don't work, all other lights do? No brights or dims, fuses all seem to be ok, what would be the next item to check? I have been told the headlight switch but not sure how I would...


Make sure the TBC fuse is good in the fuse box under the hood. There is also a Headlamp relay, and fuses marked LT HDLP, and RT HDLP, If the RT HDLP and LT HDLP fuses have power, the headlight switch is good. Be sure battery power is present on both sides on these 3 fuses. If you ground the PURPLE or YELLOW wires at the bulbs, they should light. If they do, the one thing that the high and low beams have in common is the hi-low beam switch and the ground for the switch. The ground ends up at the lower left corner of the dash, under the windshield. The relay is a common relay and you will be able to find another one in the fuse box to swap for testing purposes.

Nov 13, 2009 | 2002 Cadillac Escalade

1 Answer

Radio fuse


# 18 for radio and it is a 20amp...see below for all #'s got to and amps... 1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
13-10amp-bodycontrolmodule/cmtc/cluster 14-spare
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
32-10amp-radio/frtdoorlockswitches/bodycontrolmodule
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts

Jul 29, 2009 | 2002 Jeep Liberty

1 Answer

My 1992 Corolla DX headlights won't come on! I have changed the fuses and the bulbs. The relay clicks when turning the switch and the wiring seems to be in good condition but I am no electrician. The...


Power flows from the battery to the main fuse. Then it flows to the control coil and contact side of the headlight relay. When you turn on the headlights, the headlight switch provides ground to the control coil in the headlight relay and that operates the contacts. The contacts allow power to flow to the right and left hand headlight fuses. Power flows to the headlights. The headlight switch is what provides ground to the high and low beams on the headlights.

To diagnose, remove the headlight relay. Using a voltmeter, check for battery voltage on terminals 3 & 4 in the socket with the key in the RUN position. Then turn on the low beams. Test for good ground on terminal 1 in the socket. If you're not getting ground, then you've got a problem with either a bad headlight combo switch or a bad ground. If you get good ground on terminal 1, reinstall the relay, turn on the low beams and test for power in the headlight sockets. If you get battery voltage, that confirms you've got good fuses and wiring up to that point. Next, check for good low beam ground on the red/green wire in the bulb socket. If you're not getting good ground, it's either a bad combo switch or bad ground from the combo switch. Then turn on the high beams and check for good ground on the red/yellow wire in the bulb sockets.

It wouldn't hurt to clean the ID ground on the left side of the instrument panel, but based on everything you've said so far, this sounds like a bad combo switch

Jul 26, 2017 | 1992 Toyota Corolla

6 Answers

2002 jeep liberty interior fuse diagram


1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
13-10amp-bodycontrolmodule/cmtc/cluster 14-spare
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
32-10amp-radio/frtdoorlockswitches/bodycontrolmodule
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts

Jul 03, 2009 | 2002 Jeep Liberty

2 Answers

I don't have an owners manual and I need a fuse diagram for my 2002 jeep liberty


There is normally a diagram printed onto the the inside of the fuse case.

May 24, 2009 | 2002 Jeep Liberty

2 Answers

!997 Chevrolet S10 headlight problem


ya know it kinda sounds like the headlight switch that switches from high beam to low beam has a bad contact. You don't have one of those 4-beam modules that turn on all 4 lights on high beam do you? that thing screwed my whole headlight system up, I ended up throwing it in the trash.

I have the chiltons and haynes manual, I'm sure between the two we'll find a good diagram. I gotta get my youngin to open house at school, but I'll pull the books out and send you the wiring diagram.

Aug 07, 2008 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
1987 Toyota Camry Logo

1,221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...