2008 Ford F-350 Logo

Related Topics:

A
Anonymous Posted on Aug 26, 2014

How do you reset anti theft mode on a 2008 f350 6.8 liter ?

Came in as a no start found fuse blown for fuel pump relay changed fuse truck started and did came up with a theft code

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Nov 03, 2008

SOURCE: shuts off while driving. no fuel pressure. pcm fuse blows/ fuel pump relay inserted.

Sounds like the fuel pump is shorted.

Ad

Anonymous

  • 8 Answers
  • Posted on Jul 03, 2009

SOURCE: 99 DODGE STRATUS WON'T START STILL

theres a black vacum box under the car by the gas tank replace it

fordexpert

  • 5692 Answers
  • Posted on Aug 24, 2009

SOURCE: ford explorer eec relay

Try a new relay first. This may not be good news if that does not work. If you can find the EEC (computer) and unplug it, then replace the fuse-if it blows you have another cheaper part on the circuit thats bad.
If the fuse does not blow, then the EEC must be shorted.
If you have to replace the EEC you may find a kindly dealer with a cash-for-clunker sitting there to violate. Salvage yards have them, Ebay sells them. I have seen them at swap meets for $20. They are a high price part even rebuilt at Dealers or autoparts stores.

fingaz22

michael schultz

  • 1068 Answers
  • Posted on Oct 25, 2009

SOURCE: Where is Fuel Relay for 2004 Dodge Ram 3500 Diesel Truck

it doesn't have a fuel pump relay it has a fuel pump control unit and it is located on the chassis back quarter drivers side near the tube cross member for chassis on top of chassis rail near bed mount. locate the rear springs front perch and it will be above that on top of rail.

hope this helps. good luck and please ask any question you have.

Testimonial: "Thanx for info..no wonder I couldn't find Relay! "

Anonymous

  • 564 Answers
  • Posted on Jan 31, 2010

SOURCE: car cranks but doesn't start, no fuel pump sounds

have u ck spark,,fuel pump reley,,

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2009 Ford Flex. I have 09 flex, it cranks starts but starter keeps engaging and will shut off. No codes.

Question edited for clarity and toss in some CAPS.
Question moved to model category.

When you changed, or even disconnected the battery, did you reset the anti theft system and engine immobilizer?

How do i perform the 2009 Ford Flex anti theft reset?

Vehicle History https://www.vehiclehistory.com > questions > how-do-...
Jul 16, 2020 - Resetting the anti-theft system in Your 2009 Ford Flex is easy to do, and will take around 8 to 10 minutes of Your time.

I have a 2009 Ford flex that's stuck in antitheft mode. What

JustAnswer https://www.justanswer.com > Ford Repair
Oct 30, 2022 - 1-Disconnect both battery cables, positive & negative. 5- Reconnect battery positive first, then negative post.

1 answer · Top answer: Hi! Welcome to JustAnswer.
Thank you for contacting us for assistance with your vehicle. I'm ...
How reset anti theft alarm in 2009 ford flex - JustAnswer
Jun 3, 2014
Security system went off last night. now the 2010 ford flex
Jul 12, 2012
I have a 2009 ford flex that will not start. all of the - JustAnswer
Jan 29, 2018
My Ford flex is in anti theft mode, and it is preventing me
Jun 10, 2023
More results from www.justanswer.com

..
0helpful
1answer

2000 Mercury Grand Marquis cranks, but won't start and while cranking the theft light on flashing fast.

Question edited for clarity.
Question moved to model category.

That is a lot of items changed for nothing. The flashing anti-theft light was telling you the answer.

Key
  1. Insert the key into the driver's side door lock.
  2. Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds. ...
  3. Do this again, but turn the key in the opposite direction.
  4. Remove the key from the door, get into your Ford, and start the engine. The system should be reset.

How to Reset the Anti-Theft System on Your Ford

..

And also this!

https://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=3731914

..
0helpful
3answers

1998 Ford Ranger. I replaced motor, now no spark, no fuel.

Does it have an alarm and immobilizer? If so, it needs resetting.
0helpful
1answer

1999 Crown Victoria anit theft light blinking and cannot get it to start.

It will never start until the codes are canceled in its computer brain. Takes expensive specialty tools. A dealer can do it but you have to get it to them. A less expensive way is to call and ask a mobile mechanic if can do it. Not all of them can. Replacement keys fob are not expensive online but they also need reprogramming also.
0helpful
1answer

How do I reset the anti theft on the car?

this will sound odd, but I was having the same issue, and I tried everything on this forum but I wasn't getting anywhere, but I decided to check all my fuses under the dash and found out on my 2010 Ford E350 fuse #54 fuel pump relay coil, was blown, I replaced it and the van started right up, I was having all the issues of a PAT system failure, dash lights on, security light blinking, and advance track service light on.
0helpful
1answer

Cranks but won't start

No reset switch. Hook up a fuel pressure gauge an check pressure . Check electrical circuit , voltage drop testing . are the fuel injectors firing ? Anti-theft system light lit ? anti-theft system problems on some vehicles will disable fuel injectors .

Testing Electric Fuel Pump Problems with Voltage Drop Test
0helpful
1answer

97 f150 4.6 wont start after it stalled due to the ac pump seizing up and causeing the engine to stall

Possible anti theft but I think that you have a blown fuse go to ford owners manual.com and register for free then download the manual then go to roadside emergencies and your fuse box diagrams and values for ignition and fuel pump as well as others //// when you put the key in does the pats system light start to rapidly flash or does it go out while cranking if rapidly the anti theft is activated or somehow your key was erased check PCM fuse ignition fuel pump coils injectors
3helpful
2answers

My GMC Yukon will not start. Tested alternator, battery and starter - all are fine

IF DASH LIGHTS LIGHTING UP.PROBLEM GOT TO BE IN STARTER RELAY OR FUSE, THE CAR COULD BE IN THEFT SECURITY MODE.WHICH WILL DISABLE STARTER AND FUEL PUMP.HAVE CAR CODE SCANNED FOR THEFT SECURITY MODE.IF DASH DONT LIGHT UP WHEN YOU TURN IGNITION KEY.YOU COULD HAVE BAD BATTERY CABLES.LOOK FOR BLOWN IGNITION FUSE.IF FUSE OKAY, YOU COULD HAVE FAULTY IGNITION SWITCH.
0helpful
1answer

No power to fuel pump relay so fuel pump not operating. Relay and fuse ok. Also tested pump off battery by-passing relay. tests ok.

Sometimes when the security system is not working properly, it can go into anti theft mode and literally shut down fuel pumps, injectors, or starters.... Read up on it thru this link and see if this might be your problem. http://vatspasslockpasskeysecurityhelp.yolasite.com/
0helpful
1answer

2000 Jeep Grand cherokee Laredo wont start. Engine turn over . No noise from fuel pump with ignition on. Replaced fuel pump and filter.Turn ignition on- pump did not run.Jumped the fuel pump at the pump...

sounds alot the the pcm it controls the fuel pump and ign system but the anti theft would keep it from starting because the key has a transponder in it programmed for that vehicle and that would kill all ign if triggered
Not finding what you are looking for?

433 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...