<!-- from fixya rte -->How toreset light for 2008 mercury sable? - 2008 Mercury Sable

SOURCE: 1996 Mercury Sable LS. Problem: Dome light and

have you checked to make sure the dimmer switch isn't turned all the way up? if the dimmer is turned all the way up it will keep the lights inside the car on. check the dimmer switch

SOURCE: I acnnot find how to

The following procedure will reset your oil change light. Thank you for using Fixya!

2008-2010 Sable

1. Turn the ignition to run (one position before starting engine).
2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".
3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

SOURCE: seat heater pad stoped working in a 2008 mercury

You need a professional scan tool to check it out

So you need a repair shop or dealer, if you would
like to pay them twice as much for the same job

Colin Stickland

• 22516 Answers
• Posted on Nov 17, 2012

SOURCE: how to Installed new heater pad on Driver Side of a mercury sable model 2008

If you mean the heated seat then disconnect the battery ,leave overnight with the battery cables joined together as this will discharge the airbag module then remove the seat and strip the cover off of it