The actual switch to roll your window up, or is it the window motor? window switch is easy. all you have to do is remove door panel and disconnect the connector from the switch and pop it out of the panel and install the new one. window motor, you have to remove panel and there is a metal frame on inside the door that is sometimes riveted. if that's the case, you may need to rivet it after you pop the rivets. or some make a hole around the motor specifically there to replace the motor. shouldn't be a bad job. all you have to do is get in there and see what you got. not that hard of a job.
119 views
Usually answered in minutes!
×