SOURCE: car wont start or turn over
check your theft detterent system. Turn ignition to on and leave it for ten minutes. Turn ignition off and start the car
SOURCE: chrysler wont start
Sounds like a short maybe. maybe the wire completely broke? if you know a technician, see if the fuel pump is even getting power when key is on
SOURCE: 94 z wont start
check the ignition fuse, fuseable link and starter relay
Testimonial: "thank you - i'll check"
SOURCE: 97 gmc pickup, 5.7 eng, fuel pump not operating,
What you need to do is check you fuel pressure. Go to a local auto parts store and buy a fuel injection pressure tester. The pressure fitting is on the top of the motor its a 3/8 ish sized metal line and has a screw on fitting like a tire valve does. This line comes up from the back of the motor to the right of the distributor and goes down into the intake. Make sure to have a rag handy to catch the fuel seepage. After you connect the pressure tester turn the key on and off three times and read the gage you should have atleast 58 pounds of pressure. If you have 56 pounds it won't run because the fuel injectors are a poppit valve style and need atleast 58 pounds of pressure to operate.
282 views
Usually answered in minutes!
You have bead connectors on the battery just clean the battery terminals and the cables connected back this will solve the problem,all the best.
×