Question about Oldsmobile Cutlass Cruiser

1 Answer

85 cutlass cruiser steering column loose - Cutlass Cruiser Oldsmobile Cars & Trucks

Posted by Anonymous on


1 Answer

Thomas Perkins

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,850 Answers

5 Related Answers


  • 146 Answers

SOURCE: 1986 Buick Park Ave. Loose Steering column

There are three inverted torques screws in the column that come loose you have to pull the steering wheel pull the swivel pins tighten the little screws. it not hard to do . it is dangerous to drive like this.

Posted on Jan 04, 2009



  • 51 Answers

SOURCE: Loose steering column


Posted on Jan 17, 2009


  • 180 Answers

SOURCE: Steering column is becoming loose on 1988 Buick Lesabre

There are 3 bolts inside that have backed out, this is a tough job. You have to have special tools to complete this job. You have to pull the pins on the side after disassembling to access the bolts.

Posted on Feb 06, 2009


Bobby Memory

  • 258 Answers

SOURCE: sounds and feels like something is loose in the in steering

that's a common problem with these trucks i have a guy i work with that has that noise i think he said that there is a u-joint in the steering column that makes the noise and that it can be greased but i've never seen it turn into anything serious just an aggrivating noise.

Posted on Oct 23, 2009


  • 2 Answers

SOURCE: I need to know how the tilt mechanism works in an

push the turn signal lever to the dash and move the steering wheel.

Posted on Mar 06, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 94 Oldsmobile cutlass ciera ECM fuse blows when I turn my steering wheel to the left why??

loose wiring somewhere in the steering column is the first thing i'd look for

Nov 22, 2014 | Cars & Trucks

1 Answer

How do I remove the panel beneath the steering wheel?

There is a panel directly under the steering column will just pull down... you have to do that to take off the panels covering the steering column. The bottom panel of these two is held in place by screws.

Oct 31, 2014 | 2005 Chrysler PT Cruiser

1 Answer

1989 chevy celebrity with adjustable steering and pulsating intermitant wipers etc. Steering wheel loose and rotates in 45 degree angle from side to side and up and down.

Well, first of all, the odds are the tilt section can be tightened back up without replacing anything. There are 3 bolts that get loose over time.
Second, if you really do need another column, any A body GM car built between 85 and 90 will work. That includes Pontiac 6000, Buick Century, and Olds Cutlass Cierra. The only real difference is the steering wheel which you would not have to change.

Sep 14, 2012 | Chevrolet Celebrity Cars & Trucks

1 Answer

The key will not turn over to kick over the starter. i got a new key assembly but cant figure out how to take the wheel apart to put it in

there are some videos on youtube showing replacement of the lock cylinder on various GM products. from the few i have watched it is more of removing the cosmetic plastic pieces around the steering column as opposed to removing the steering wheel. if the car has an airbag, you do not want to pull the wheel off anyway unless you are trained.

Jun 30, 2010 | 1991 Oldsmobile Cutlass Cruiser

1 Answer

I have an 85 ford tempo, it will only stay running

You could have a faulty wiring harness on the steering column (or it could just be loose) or you need to replace the ignition.

Jun 26, 2010 | 1985 Ford Tempo

1 Answer

96 cutlass supreme with steering column issues

you can jump out the security.. you can not trade out can try a relearn process.. as follows.. turn ignition on for ten minutes do not crank. after ten minutes turn key off then right back on for another 10 minutes...then one more time off then back on for ten minutes..then off hen try to crank.. if car starts then done.. if not send me email for way to jump out ignition.. kbutlrtech at

Jan 03, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Steering column is loose need instructions how to fix it after steering wheel is removed

If you look under the dash. You will see a support bar with a bolt on each side. This hold column in place. The other connection is where the column sits inside gearbox. The gears could be worn or box is loose.

Nov 30, 2009 | 1992 Oldsmobile Cutlass Supreme

2 Answers

1987 dodge ram van STEERING COLUMN

to whom this may concern did you find a steering column. Are you replacing it in a 1987 dodge pick-up

Apr 23, 2009 | 1987 Dodge Ram Wagon B250

1 Answer

Turn signal flasher relay

you should be able to remove the bottom panal under the dash w/ acouple screws to expose a round flasher that might still be attached to the steering column..,unplug wire assy.-3 wire generally...plug in new one...but sometimes there is 2 of these under the dash-- 1 for turns...1 for 4 way flashers-[hazards]...kev-mn.

Nov 09, 2008 | 1987 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides