I HAVE A 96 TBIRD, TODAY IT WONT START. THE ALARM LIGHT IS BLINKING AND NEVER HAS BEFORE. THE VEHICLE DID NOT COME WITH A KEY FOB TO ARM AND DISARM IT. IS THERE A WAY TO DISARM IT SO I CAN GET IT STARTED?
Try unlocking door with key or use your other key
SOURCE: wife is stuck with sister,
I am not a Ford expert but has she tried unlocking the car with the outside driver's door key cylinder? This works on most makes and models to disarm the alarm.
SOURCE: problem with ford explorer alarm imobiliser
You should have a switch under the dash and then just turn it to the off position. If you don't or it doesn't work (like mine) then, there is 2 fuses under the dash, put the key in the ignition and turn it forward, pull one of the fuses out and then start the car that should reset it. Then you should be able to put the fuse back. Sometimes if you put the fuse back before starting it the alarm will just continue to try and reset itself, but not start the car. If that doesn't work I have a mechanic who can pull the whole alarm out and when hes done it would look like nothing has ever been installed. Hes very good. I ended having him take my alarm out when I had the same incident happen after the 2nd time.
SOURCE: I have a 1996 ford Explorer with single button on
if its a factory alarm you can not bypass it, it goes through the computer however a one botton alarm is usually an aftermarket starter diable try finding the starter relay if it looks different replace it with a regular relay if its not just a relay you might want to look under the dash for a smaller size box and find the name of the alarm company and look on there website on how to disable it
SOURCE: ford focus rs alarm trouble
if its a factory alarm you put the key in and quickly turn the key on and of i cant remember if its 8 or 9 times but the horn will chirp then you push the lock and unlock on the fob the locks should respond then turn key off and your done. note that if you have more than one fob you have to press lock and unlock on all of them before you turn the key off and i believe you only have about fifteen seconds to do so if not let me know i will look it up at work
SOURCE: dont have code for alarm
honestly do not know ,i dont think they can be programmed but if you bought a new one then it must be possible but without a manual ?? now it would help if you posted if this is a aftermarket alarm or the original ford factory immobilisor if it is then post model and year and i will look in my alldata book to see how its done and scan and post it for you
423 views
Usually answered in minutes!
×