How can i fix the codes show on my car

https://www.obd-codes.com/p0885

https://www.obd-codes.com/p0230

Start with the PCM relay

check that the pins in the relay socket and the PCM connector are good and make contact youshouldsee12v at pcm... PCM is last resort. Check the fuel relay first for melting or burnt smell.

If you need further help, reach me via phone at https://www.6ya.com/expert/chris_b82b45c59bcf133d

Definition of Diagnostic Trouble Code P2105 Category: Powertrain Definition: Throttle Actuator Control System - Forced Engine ShutdownNote: This definition of P2105 is applied to all manufacturers

Check the fuel pump and fuel pump relay.

the code is the throttle actuator control system

P0230 == "Fuel Pump Primary Circuit Malfunction"
A great plain-english explanation can be found here:http://www.obd-codes.com/p0230

If you're comfortable using basic tools, you may find this link helpful:http://www.hotrodlane.cc/New%20LS%20Links%20Page/LS%20trouble%20codes/DTC%20P0230.htm

P0230 - Fuel Pump Primary Circuit Malfunction Symptoms - Engine Light ON (or Service Engine Soon Warning Light) Possible causes - Blown Fuel Pump fuse
- Open Fuel Pump Monitor Circuit
- Faulty Fuel Pump Relay
- Damaged ECM. P0230 Description The Engine Control Module (ECM) provides ignition positive voltage to the coil side of the fuel pump relay. When the ignition switch is first turned ON, the ECM energizes the fuel pump relay, which applies power to the fuel pump. The ECM enables the fuel pump relay as long as the engine is cranking or running, and crankshaft reference pulses are received. If no crankshaft reference pulses are received, the ECM de-energizes the fuel pump relay after 2 seconds. The ECM monitors the voltage on the fuel pump relay control circuit.
Please go to this LINK for P0300 diagnosis.

you have two many numbers in your code i assume u mean one of this two codes
P0230= Fuel Pump Primary Circuit
P2300= Ignition Coil "A" Primary Control Circuit Low

P0232....Fuel Pump Secondary Circuit High

P0230....Fuel Pump Primary Circuit

P0215....Engine Shutoff Solenoid

P0122....Throttle/Pedal Position Sensor/Switch A Circuit Low Input

P0522....Engine Oil Pressure Sensor/Switch Low Voltage

That code is: Fuel Pump Primary Circuit Malfunction. Could it be the wires are not on tight or one is shorted? Check wiring very carefully.