2006 Mitsubishi Outlander Logo

Related Topics:

A
Anonymous Posted on Aug 13, 2014

How to operate dynamic cruise control for mitsubishi outlander 2006

5 Related Answers

Anonymous

  • 398 Answers
  • Posted on Mar 07, 2009

SOURCE: Filler to add oil automatic transmission Mitsubishi Outlander 06

use the dipstick hole, you need a certain funnel. if you cant fiind it let me know.

Ad

ANDY PLUMB

  • 150 Answers
  • Posted on Mar 07, 2009

SOURCE: Mitsubishi Lancer 2006 cruise control

The cruise control enables you to set the car speed mainly on motorways at a constant speed enabling you to take your foot off the gas pedal.It disengages as soon as you touch your brakes. It is activated/deactivated by the paddle switch on you steering wheel.

Anonymous

  • 710 Answers
  • Posted on May 16, 2009

SOURCE: 2004 mitsubishi outlander cooling fans not operating

TAKE A PEEK UNDER THE HOOD IN THE FUSE PANEL FOR THE FUSE AND RELAY FOR THE COOLING FAN. IF THE FUSE IS BLOWN THEN REPLACE IT. IF YOU SUSPECT THE RELAY TO BE BAD THEN TEST IT BY SWAPPING THE FAN RELAY WITH ANOTHER ONE WITH THE SAME PINS ON THE BOTTOM. MAKE SURE IT IS THE SAME SIZE AS WELL. HOPE THIS HELPS.. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

Anonymous

  • 333 Answers
  • Posted on Sep 10, 2009

SOURCE: mitsubishi outlander cooling fans not operating

There is a Recall to replace your cooling fan module because of this concern.

Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.

Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.

If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.

Anonymous

  • 1 Answer
  • Posted on Oct 30, 2009

SOURCE: "Set" light when you're up to speed in Cruise control

I believe you mean stays lit; yes I have the same problem, when I start the vehicle, the cruise control is always on even though I haven't been using it. Sorry I don't know the answer but I can commiserate with you.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My cruise control no longer works on my 2003 Mitsubishi Outlander. What may be the problem?

  1. Disconnected or damaged vacuum lines to main cruise control unit;
  2. Bad or misadjusted brake light switch (most likely);
  3. Defective cruise control switch;
  4. Failed main cruise control unit.
0helpful
1answer
0helpful
1answer

2006 Mitsubishi Outlander - cruise control, rear lights, phone charger stopped working

Check your Owner's manual for fuse location. You may a fuse panel under the hood as well as under the dash - driver's or pass. side.

GL,
Td
1helpful
1answer

Replacing brake lamp in 2006 mitsubishi outlander

put some tape on a flat screw driver a pry the lense off keep wiggling the lense and it will come off be carefull not to scratch the paint good luck CJ
0helpful
1answer

The cruise control in my 2006 Mitsubishi Outlander does not work.

There is a round cruise control count on the left side of the wheel well and it has a cable going into the back replace that
0helpful
1answer

"Set" light when you're up to speed in Cruise control

I believe you mean stays lit; yes I have the same problem, when I start the vehicle, the cruise control is always on even though I haven't been using it. Sorry I don't know the answer but I can commiserate with you.
0helpful
1answer

Mitsubishi Lancer 2006 cruise control

The cruise control enables you to set the car speed mainly on motorways at a constant speed enabling you to take your foot off the gas pedal.It disengages as soon as you touch your brakes. It is activated/deactivated by the paddle switch on you steering wheel.
0helpful
1answer

Filler to add oil automatic transmission Mitsubishi Outlander 06

use the dipstick hole, you need a certain funnel. if you cant fiind it let me know.
Not finding what you are looking for?

208 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...