Question about 1996 Volkswagen Jetta

Open Question

I want to rewire my jetta csi without the computer box,its a carberater and i dont have a wiring harnes so i want to make my own

Can any one supply me with a diagram please

Posted by Charl Stander on

Ad

1 Related Answer

Vernon Taylor

  • 7113 Answers

SOURCE: Nee need a wiring diagram for a fuse box which fuse diagram with relays please for a 1994 Volkswagen Jetta

Vehicle fusebox and relay layouts tend to vary depending on territory and trim level, options, etc.

Repair manuals tend to provide a generic or aggregate version.

The handbook supplied with the vehicle is the best source of information.

Posted on Oct 03, 2017

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 jetta changing harnesss in engine compartment because i swapped engine and trans from auto to standard and want to use manual wiring harness but when i get to where it connects to the interior wires...


No easy way I know of, perhaps if you can get hold of the auto and manual wiring diagrams and work from there, you will have to change the computer as the manual and auto are not the same.

Feb 03, 2018 | Cars & Trucks

1 Answer

1997 jetta window won't roll up


oftan times its the master controle switch on the driver side that allows the power for the passanger sid the other comman problem is the harnes in the door jam has a broken wire or more than one take the pannel off the kick pannle off unplug the harness at the kick pannel take the rubber loom cover between the door and the rig loose pull some wire through so you can see it and find the break and repair hoped this helped

Jul 22, 2012 | 1997 Volkswagen Jetta

1 Answer

2005 pt cruiser, mechanic says engine wiring harness shoted out. I want part number to find normal pricing, mechanic says he could rewire or replace. $578.00 replacement price. ouch Need a part number


that is bull you need a new mechanic unless the car cought on fire the wireing harnes can't just short out they are just wires think about it if there is a bad spot if you use the right conectors you can replace just the spot that is bad they don't put majic wires in cars stay away from that guy he is trying to rip you off!!!!!!!

Aug 24, 2011 | 2005 Chrysler PT Cruiser

1 Answer

I have a 1995 Jetta with a 1994 2.0 engine and transmission. It is an automatic. There is one wiring hookup on the 1995 harness that the 1994 transmission does not have an input on the housing for. It...


This is a problem,the 95 model has a 01m transmission and the 94 has an 096.Even though they look very similar the wiring and computer controls are very different.They will not intercahnge.You will need to use the 95 model wiring harnes,transmission ,and computer but I am not sure this will work with the 94 model engine.

Mar 28, 2011 | 1994 Volkswagen Jetta

2 Answers

Bad engine wiring harness makes my vehicle not even wanna start


I think you're best off getting a replacement harness - rewiring the harness is probably too much work and you don't really want to go messing with the resistances of the wiring.

Just my opinion,
Sherwin

Dec 13, 2009 | 1995 Ford Contour

2 Answers

2004 VW Jetta engine compartment fuze box location


one is located over the battery, the other is located in the side of the dash.

First panel:
If you pop your hood the battery will be on your right sid in the front of the engine bay. There is a small rectangular piece on top of the battery with a lot of heavy guage red wires going to it. That is the engine bay fuse box.

Second panel:
if you open your driver side car door it's under neath a panel located inbetween the door and the dash board.

Apr 27, 2009 | 2004 Volkswagen Jetta

1 Answer

1992 Plymouth Sundance 2.2


the wire is feed by the asd relay as commanded by the computer to supply power upon seeing cranking rpm. the wire also feeds the injectors and other sensors. the wire you need is in a harnes that runs from the drivers side to the passenger side just behind the back of the valve cover.
good luck chris

Mar 15, 2009 | 1992 Plymouth Sundance

1 Answer

VW JETTA (BORA) 2 - 1991, CLUSTER


CHECK THE PRINTED CIRCUIT ON BACK OF CLUSTER & SEE IF VOLTAGE STABILIZER IS CONNECTED IT LOOKS LIKE A SMALL PITCHFORK

Oct 04, 2008 | 1989 Volkswagen Jetta 2 Door

2 Answers

1992 Jetta


go to any auto parts place and tell them you need a haynes manual for your car, the codes should be in manual, it only costs about 20.00, or buy a computer codes manual, same price.

Jul 07, 2008 | 1991 Volkswagen Jetta

Not finding what you are looking for?
1996 Volkswagen Jetta Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...