Question about 1995 Toyota Corolla
Posted by Anonymous on
when the check engine light comes on, your car goes into a mode where instead of everything being normal, things are forced, to try and compensate for something else being wrong. It most likely does need a new timing belt, and a complete tuneup INCLUDING plugs and wires. we have a 1984 toyota corolla and it purrs like ground rice, I suggest the tuneup to continue proper rice production.
Posted on Aug 01, 2008
SOURCE: shifting problems
start with the clutch fluid, is it full? check the clutch cable from the pedal to the transmission, does it have a lot of play in it, is it adjustable? check the bushings on the shifter base, does the shifter itself have a lot of play in it? i'd start with those, if all those are ok then it might be the clutch itself. when a clutch gets worn down it doesn't release fully causing a hard shift or grinding when going into gear. put the truck on a flat surface so it doesn't free roll at all, with the engine off, put the truck in first or reverse, press the clutch pedal fully to the floor and start the engine. let off the brake. if the truck moves at all it means your clutch cable is out of adjustment or its just getting worn out. provifing the shifter and the fluid level is good.
Posted on Feb 16, 2009
SOURCE: 1995 Toyota Corolla Door Handle
My husband (who is a weight lifter) managed to bust our door handles three times during the hot summer months. It was about $35 for the not so fancy handles and installation, I think over $50 for someone to do the fancy painted handle (driver's side door). We had it done since I think at least one of the times, the door would have had to be dismantled.
FYI the Toyota dealer said that in the hot summer months, the door handles were the items ordered the most for Toyotas across the board. We don't live in a hot climate anymore, and havent had any problems with melted/broken handles.
Posted on May 22, 2009
The manual transmission in the Ford Escort uses transmission fluid, it is checked and filled in the same hole. That hole is where the speedometer cable is hooked up to the transmission. Remove the speedometer cable, set aside, then remove the locking bolt that holds the speedometer drive unit in place. Pull up on the drive unit and it will come out, look on the side of the drive unit and you will see the level indicator line for full and add. Fill as needed and reinstall the drive unit and cable. Hope this helps, let me know.
Posted on Jul 07, 2010
Tips for a great answer:
on Feb 21, 2009 | 2003 Toyota Corolla
Sep 01, 2014 | 2003 Toyota Corolla
May 18, 2014 | 2007 Toyota Corolla
NO REVERSE ON TRANSMISSION
can be issue with gears or problem with transmission and needs to be rebuilt.
Also get the tranny fluid checked. If it's low, then such problems
troubleshoot these types of issues, check the actual solved problems with these
types of issues.
are solved help links provided below: -------
the link below and go through the details and diagrams to troubleshoot the problem:
2003 Lexus RX300: Transmission Fluid Burnt Brown and not
Shift to reverse?
2007 Chrysler 300: Transmission Stuck in Park?
2000 Toyota Camry: Transmission slipping and Stuck up?
1996 Toyota Corolla: Transmission Shift Interlock will not
Lexus LS400: Transmission or Torque Converter?
CV AXLE stuck in Transmission?
Transmission in reverse, acts like it's in neutral?
Delayed shift and harsh Shifting?
Dodge neon wont go in reverse?
Dodge Automatic transmission will not go into reverse?
Dodge manual transmission will not go in reverse gear?
Transmission is making buzzing noise?
1998 Dodge Ram: Not Shift To Reverse?
Transmission leak on Toyota?
Automatic transmission, with no reverse?
No Movement When Transmission is Shifted to Drive or Third?
While going in reverse mode Fuse number 27 blows on Ford
These will help.
Feb 15, 2013 | Cars & Trucks
Nov 27, 2012 | 1993 Dodge Dakota
Nov 25, 2012 | Cars & Trucks
May 01, 2010 | 1995 Toyota Corolla
Apr 13, 2009 | 1995 Toyota Corolla
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: