Question about Honda Ridgeline
Posted by Anonymous on
P0453 is for the fuel tank pressure sensor. This code means that the voltage on the sensor was greater than 4.5V during key on engine off or during any engine operating mode.
Normal voltage from this sensor with no vacuum or pressure on the system should be 2.37 to 2.97V.
PCM sends a reference voltage of 5V to the sensor and tells if there is pressure or vacuum in the fuel tank by the voltage that returns from the sensor.
Possible causes are:
Usually it is a loose connector at the sensor or a bad sensor.
It mounts on top of the fuel tank,has a 3 wire connector. To replace it you have to push down on it and twist,if I remember right CC.
Posted on Mar 10, 2009
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. Try changing the gas cap first then check the rubber hoses that are visble on top of the engine. Vote "Yes" for me!
Posted on Aug 18, 2009
SOURCE: 1996 saab 900s p0441 evaporative
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
EVAP emission canister purge is contolled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.
Causes: A code P0441 could mean one or more of the following has happened:
* Bad vacuum switch
* Broken or damaged EVAP line or canister
* Open in PCM purge command circuit
* Open or short in Voltage feed circuit to Purge Solenoid
* Faulty purge solenoid
* Restriction in EVAP solenoid, line or canister
* Corrosion or resistance in purge connector
* Bad PCM
Possible Solutions: With a P0441 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
* Common Chrysler fix - Replace Leak Detection Pump / LDP
* Repair damaged EVAP lines or canister
* Repair open or short in voltage feed circuit to Purge Solenoid
* Repair open in PCM purge command circuit
* Replace purge Solenoid
* Replace vacuum switch
* Repair restriction in Evap line or canister or soleniod
* Repair resistance in purge connector
* Replace PCM
Test it and tel us news.
Posted on Jan 11, 2011
Tips for a great answer:
Dec 30, 2015 | Honda Cars & Trucks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
P0441 1998 Toyota Camry Evaporative Emission Control System Incorrect...
Possible causes - Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve
P0441 Toyota Evaporative Emission Control System Incorrect Purge Flow
Jun 01, 2015 | 1998 Toyota Camry
Jul 21, 2014 | 2000 Mercury Mountaineer
May 20, 2014 | 2007 Honda Ridgeline
Feb 06, 2014 | 2003 Toyota Land Cruiser
Feb 25, 2013 | 2002 Toyota ECHO
Aug 13, 2010 | 2003 Saturn VUE
Aug 06, 2010 | 1996 GMC Jimmy
Jun 15, 2009 | 1996 Chevrolet Monte Carlo
865 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: