Fog lights are not working
SOURCE: toyota land cruiser unknown warning light
Try calling these guys and see if they can help.
(818) 882-1238
SOURCE: 2000 Land Cruiser Parking Brake alarm will not turn off.
check the parking brake switch if it is engaging and disengaging when you pull the the parking brake.
SOURCE: swapping out radio from salvaged
Is the salvaged radio EXACTLY the same as the original radio? Are you sure everything is plugged in correctly? If the radio is not EXACTLY the same. the circuits could be different and the wiring harnesses may not provide power at the correct pins on the radio. Also, do you have the security code for the salvaged vehicle? The code for your radio will not work in the salvaged vehicle radio.
Also check to be sure that you did not cause the fuses to blow when disconnecting/connecting radio components. If you attempted this job without first disconnecting the battery cable, there is a very good likelyhood that this has occured. Damage to the salvaged radio could also have occured if the salvage vehicle battery was not disconnected during removal of the salvaged radio.
SOURCE: reset Timing light toyota l/cruiser 101
You dont. this is controlled by the computor using signals from the crank sensor, the cam sensor which incorperates variable valve timing.
SOURCE: What should it cost to replace a heater core in a 1997 Land Cruiser
varies by series and what is used in your country, HVAC setups are not a world wide constant , nor are parts costs or labor.
why not diagnosis it.??????
1: is engine coolant NOT at 180F, (scan it or pyro gun it) dead simple
if car has a core water valve it must be open and flowing.
2: blow fan is dead, (on high must work)
3: air flow through core is not flowing.
if the core is back flushed, like it should be ever 2years then its
not packed up, remove hoses back flush it. does it flow
yes, good, its not bad (if not leaking incab)
no, its packed up, so blast it some more with a water hose.
now its fixed. simple huh and not removing it.
now #3
all above is good but #3
air flow, so move all the damper by hand , got heat now?
if yes, you just discovered why. bad damper controls'
the FSM covers in details how , for damper. read it.
in usa its also at alldata.com read it. read the damper sections .
122 views
Usually answered in minutes!
×