1997 mustang gt console wiring diagram - 1997 Ford Mustang Cobra

SOURCE: distributor cap wiring diagram

here is the firing order if the cam is stock.

SOURCE: where is the amp on a mach 460 system in a 2002

there are three amps. One is in the front in the dash board. The other two can be accessed through the trunk in the very back. You have to remove the two side panels first and then there are screws or some kind of bolts on the top of the back panel holding the back panel in place. Remove that you'll see in the center your motor to your convertible top and on the side your two amps.

if you have any questions just email me... [email protected]

good luck,

brandon

SOURCE: Firing Order for 2001 mustang gt 4.6 2v

The firing order is = 1-3-7-2-6-5-4-8

SOURCE: Wiring diagram 1966 Mustang

I would search the internet for it. That's the only advice I can give you for now. Also when searching put in Wiring Schematics instead of diagram.

ZJ Limited

• 17989 Answers
• Posted on Jul 14, 2010

SOURCE: p1443 auxiliary emission control, 1997 mustang gt

DTC P1443 EVAP Purge Control Solenoid '2' Circuit Fault

Check the evap line and components for damage. Has a tune up ever been done?

Good luck.