At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
91 mitsubishi pajero v3000 the overdrive wont go in and if it does it keeps dropping out if u want it to go in youve got to floor it off the mark and keep it revving along but still will drop out after a while trucks been hooked up to the computer but engine cheacked sweet but not much info around on this veihcal and people dont want to know eaither anyone know much bout this veihcal info would be geatfully recieved
Well not having overdrive has nothing to do with the motor you are having transmisson trouble and the first thing you need to do is get the tranni serviced flushed new filter and put a quart of lucas tranni treatment in i have seen that stuff stop tranni slip it worked in the 1999 envoy i have right now and do not floor it any more that will send your tranni to a early grave
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the start fuse first. Then try to start it neutral, not park. It could be the fuse, the safety neutral switch, or the ignition switch. My guess would be the neutral saftey switch.
there is a small switch close to brake pedal this switch must be close the pedalopens the switch when is pressed, other could be a fuse or a vacuum hose
Check overdrive relay. Its far left front in the glove compatmet.Its not going into overdrive. I had same issue went to left side of gearbox located od slonoid and rewired it.
this function allows you the option to turn overdrive off for towing purposes. when your vehicle shifts into overdrive the output shaft of the transmission spins faster than the input to keep engine rpms down and maintain fuel economy. by going into overdrive your vehicle loses torque which is why turning off overdrive for towing makes the pull easier by keeping rpms and torque higher
In 2.8 Pajero the speedo receive electronic signal from the VSS sensor, but if the speedo for any reason stop working, O/D will stop work because the Trans ECU needs signal from the speedometer electronics to made the gear change into O/D
I'd check the overdrive solenoid atop of the tranny. Apply 12V + to it and see if it will go in to OD. If it does you will need to check the OD relay or temp switch. Or rewire a new switch.
×