Hyundai Motor 2002 Elantra Logo

Related Topics:

A
Anonymous Posted on Jul 12, 2014

Can i disconnect the battery of a 2008 hyundai elantra to access the trunk from the inside

5 Related Answers

pushpdeep17

pushpdeep singh

  • 47 Answers
  • Posted on Oct 22, 2008

SOURCE: I Locked my keys in my 2001 Hyundai Elantra

wellits a smilple thing they have this round wire with a handel and they will yake the strip of ur driver side window don't worry it can be put back no need to buy a new one . and he will push the wire that is connecting both the handels and then open ur door.

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 09, 2009

SOURCE: location of oil filter on a 2008 hyundai elantra

It is located under the alternator. If you are looking down at the engine, it is to the far left. If you are under the car it is to the far right before the oil pan.

USfalcon

anwar alkhaldi

  • 197 Answers
  • Posted on Mar 16, 2009

SOURCE: How to replace headlight bulb hyundai elantra 2004

yes , you need to remove the headlight cover from the back after u move the bulb conector then there is a holder for the bulb u need to push down then move.
i hope it help ,,,, thanx

Anonymous

  • 15 Answers
  • Posted on Jul 08, 2009

SOURCE: ELANTRA ALARM PROBLEM

If the alarm keeps going off constantly and the remote has no influence on the alarm its most likely a connection problem. A hyundai dealer might be able to fix it but since you can start the car something you might be able to try is....
Check and make sure the remote battery is in the right way. Make sure all of the doors are closed, the trunk is closed, open the hood, connect the battery, close the hood all the way and try to lock and unlock the doors. Hope this works but if not, sorry it didn't work.

Anonymous

  • 1 Answer
  • Posted on Sep 01, 2009

SOURCE: Car Stereo

I HAVE A 2008 HYUNDAI ELANTRA. I HAD THIS PROBLEM WHEN I WANTED TO REPLACE MY FACTORY RADIO. I ENDED UP TAKING APART MOST OF MY DASH TRYING TO FIGURE IT OUT. AFTER ALL SAID AND DONE. I FOUND OUT THAT THE PIECE THAT GOES AROUND THE RADIO JUST SNAPS INTO PLACE. I USED A COUPLE OF FLAT HEAD SCREW DRIVERS TO PRY IT OFF. THAT IS IT. IT IS THAT EASY. THE WHOLE CAR JUST SNAPS TOGETHER. THE CAR IS CHEAPLY PUT TOGETHER.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2008 Hyundai Elantra. How to replace automatic shift cable on it please?

Question edited for clarity and add maker.
Question moved to model category.

Shift Cable Repair procedures - Automatic Transaxle Control ...

helantraad.com https://www.helantraad.com > shift_cable_repair_proc...
1. Air cleaner assembly and air duct. · 2. Battery and battery tray. · 3. Remove the nut (A) from the manual control lever. · 4. Remove the shift cable (B) from ...

2008 Hyundai Elantra Automatic Transmission Shifter Cable

Hyundai Parts Pro https://www.hyundaipartspro.com > Automatic-Trans...
Automatic Transmission Shifter Cable. 2008 Hyundai Elantra. Genuine Hyundai Part - 467902H100 (46790-2H100). Ships from Hyundai Parts Pro.
Rating: 4.8 · ‎361 reviews · ‎$105.19

..
0helpful
1answer

How to replace ignition switch on a hyundai tiburon

Removal & Installation

Specific to:
Hyundai Entourage 2007-2008
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the negative (-) battery terminal.
  3. Remove the crash pad lower panel (A).

    0996b43f80e41e86.jpg
    enlarge_icon.gifenlarge_tooltip.gif
    Fig. Remove the crash pad lower panel (A)
  4. Remove the 2 screws (A) and the trip switch connector.
  5. Remove the crash fascia panel (B).

    0996b43f80e41e87.jpg
    enlarge_icon.gifenlarge_tooltip.gif
    Fig. Remove the crash fascia panel (B)
  6. Remove the screw with the ignition in the ON position (IG ON) and disconnect the 6P connector.
  7. Remove the ignition switch (A).
  8. Installation is the reverse of removal procedure.

    0996b43f80e41e88.jpg
    enlarge_icon.gifenlarge_tooltip.gif
    Fig. Remove the ignition switch (A)
Specific to:
Hyundai Accent 2006-2008
Hyundai Azera 2006-2008
Hyundai Elantra 2006-2008
Hyundai Sonata 2006-2008
Hyundai Tiburon 2006-2008
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:

    The negative battery terminalThe crash pad lower panelThe ignition switch after loosening the screw with IG ON and disconnecting the 6P connector
  3. Installation is the reverse of the removal procedure.hope this helps it is off autozone website
1helpful
2answers

Wondering how to change the third brake light (one located in back window) on a 2006 hyundai sonata

High Mounted Stop Lamp Removal & Installation To Remove:
High Mounted Stop Lamp hyundai-06-00-5896.gif

  1. Disconnect battery negative cable.
  2. Disconnect high mounted stop lamp electrical connector from inside trunk.
  3. Remove package tray.
  4. Replace bulb from package tray.
To Install:
High Mounted Stop Lamp hyundai-06-00-5896.gif

  1. Install package tray.
  2. Connect high mounted stop lamp electrical connector from inside trunk.
  3. Connect battery negative cable.
prev.gif next.gif
1helpful
2answers

Trunk lid warning sign won't go off even though trunk lid is closed for 2007 Hyundai Sonata

check the deck lid latch to ensure the wire harness did not get pulled off somehow... That would be the only thing I can think could cause the boot ajar light to stay on.
1helpful
1answer

Where is the fuel pump located on a 2000 Hyundai Elantra?

Sorry , its probably inside the gas tank. If you are lucky , there will be an access panel under the back seat , or in the trunk. If not , the fuel tank has to be removed.
27helpful
3answers

Keys lock in trunk alarm will not allow trunk switch to lock

The solution is to pull out the back seat to get into the trunk. There are two bolts holding the bottom part of back seat (bolts located between bottom and top sections). Then pull out bottom section of back seat and you see the hinge for the top section, remove the bolts and then you can lift up and access the trunk. It's not that hard.
0helpful
1answer

How to remove brake bulbs

There are three mounting nuts on each lens assy which are accessed from the trunk behind the liner.

e5045b4.jpg
0helpful
1answer

How to replace the revese light of hyundai elantra 2003

1. Disconnect the negative (-) battery terminal. 2. Remove the nuts holding the rear combination lamp. 3. Disconnect the connector and remove the lamp assembly.

It is located in the trunk, behind the furthest rearward panel. (right inboard of the light housing).
0helpful
1answer

2008 Hyundai Elantra

time for you to replace the remote control. common problem.

jj hyundai master tech boston ma.
Not finding what you are looking for?

32 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...