Anonymous Posted on Jul 10, 2014

What does codes p1529, p0755 and p1529 mean? I am sure it is something to do with transmission.

I was driving when the car jerked hard and then the transmission wouldn't shift. I would go a steady 55 mph and the rpm's was 3k plus. I was close to home so parked and checked fluids and all was good. Now when I start and change from park to drive it shifts hard.

2 Answers

carl blood sr

Hyundai Master 846 Answers
Posted on Jul 11, 2014

carl blood sr

Hyundai Master

Joined: Mar 12, 2013

Answers

846

Questions

Helped

350156

Points

2443

P1529
TCM MIL request signal, this code sets in the computer engine control module when there is a transmission fault code. HYUNDAI: ATA SOLENOID DIAGNOSTIC TROUBLE CODES P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765, P0770. INCORRECT OPERATION OF THE TRANSAXLE SOLENOIDS MAY RESULT IN THE FOLLOWING SYMPTOMS-CHECK ENGINE LIGHT ILLUMINATED. check with dealer for correct fix. this is from a service bulliten. Good-Day!

Norm Mosher

Contributor 8 Answers
Posted on Jul 11, 2014

Norm Mosher

Contributor

Joined: Jun 03, 2014

Answers

Questions

Helped

3444

Points

P0755 Shift Solenoid B Malfunction
cam not find the P1529 you can call auto zone maybe they can help

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have a 2002 Hyundai accent, code P1529.

P1529 means nothing more than the TCM (transmission control module) has requested that the ECM (engine control module) turn on the check engine lamp. Best to have this checked out as there could be an error code for the transmission.

Read full answer

Jun 06, 2019 • Hyundai Cars & Trucks

0helpful

1answer

P732, p1529, transfer

code P0732 - gear 2 incorrect ratio possible cause solenoid or related pressure switch is damaged or failed. problem related to the input speed or output speed sensor.low reverse clutch is damaged leaking or failed.faulty valve body. transmission fluid level incorrect or level is too low. code P1529 -

Read full answer

Sep 22, 2013 • 2003 Hyundai Santa Fe

0helpful

1answer

P732 and p1529

Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Solenoids
- Shift Solenoids harness is open or shorted
- Shift Solenoids circuit poot electrical connection
- Transmission mechanical problems
- Transmission hydraulic control circuit

Read more: Eobd2.com

Read full answer

Sep 19, 2013 • Hyundai Santa Fe Cars & Trucks

0helpful

1answer

P1529 p0732

code p1529 refers to transmission control module-communication===causes --wiring-TCM and ECM
code p0723 refers to output shaft speed sensor (OSS)-circuit intermittent==causes--wiring--poor connection--OSS sensor --ECM /TCM
n both codes the TCM shows and the wiring may be a loose /dirty connection at the gear box level

Read full answer

Aug 31, 2013 • 2003 Hyundai Santa Fe

0helpful

1answer

I have a 2004 Kia Spectra with fault codes P1529 and P0885? something to do with the transmission, need help

I literally have the same car, same issue. But i have p1529 and p0765 codes. Will update with an answer when i find one, already replaced the transmission output sensor with no luck.

Read full answer

Mar 21, 2012 • Kia Spectra Cars & Trucks

4helpful

1answer

What is meaning p1529 on my elantra

P1529 means the TCM (transmission control module) has requested that the ECM (engine control module) turn on the check engine lamp. All I can tell you based on this information is that the TCM has seen something abnormal. To find out what abnormal condition the TCM saw, you'd need to retrieve the DTCs (diagnostic trouble codes) from the TCM. The most frequent culprit is either the input or output speed sensor, but there's no way to know whether they may be the issue without the TCM DTCs

Read full answer

Mar 20, 2010 • 2004 Hyundai Elantra

2helpful

1answer

My check engine light came on today and I stopped at a local garage. They ran a diagnostic that showed error P1529 / VIA CAN. Can you tell me what the problem is? All the notes on the web speak of just the...

Code P1529 sets in the ECM (Engine Control Module) to advise that the TCM (Transmission Control Module) requested the ECM to turn on the MIL (Malfuntion Indicator Light). What this means is there's a transmission code set in the TCM. You will need a manufacturer specific scan tool to pull Transmission codes and find out what's wrong with the trans. Some aftermarket scanners/code pullers only have the capability to pull Engine codes. -hope this helps

Read full answer

Feb 06, 2010 • 2002 Hyundai Accent

4helpful

1answer

My 2002 hyundai check engine light is on and the tranmission is slipping. The code read P1529.

dear friend-the code P1529 means transmission control module(TCM)-communication problem,so please look at the following items-wiring,tcm,ecm,
just a hint if the transmission is slipping then the tcm is getting the wrong information from the input and out sensors.

Read full answer

Nov 06, 2009 • 2002 Hyundai Accent

7helpful

2answers

02 kia optima code p1529

When driving the car cold about 10 minutes later the car will kick meduim hard , and the engine light will come on, and then it will be stuck in 3rd gear, but it only does it when the enginge light is on. codes p0720 and p1529 are what I got with the obd2 reader. the P0720 is for the output shaft speed sensor. The sensor was replaced and the computer was reset with the obd2 code reader, but the engine light came back on and I got the same codes,also car kick the same way, What can I do to fix the problem.

Read full answer

Jul 09, 2009 • 2004 Kia Optima

0helpful

1answer

My car's check engine codes are p1723, p0740, p0715, p0720, p0750, p0755, p0760, p0765, p1529. the last five codes will not erase. I just had the transmission rebuilt, so do I need a new computer? Or did I...

All of the codes are related to the transmission. Some indicate the input speed sensor. I'd bring it back to the transmission shop and tell them to deal with it. I don't know what your car was doing before you had the transmission replaced so it's hard to tell whether the repair was needed but since it was done, the problem should be the transmission shops, not yours. Best of luck and please post back, would love to hear how you make out. Greg

Read full answer

Jun 15, 2009 • 2001 Hyundai Elantra

Not finding what you are looking for?

View Most Popular

2004 Elantra

Cars & Trucks

I have a 2002 Hyundai accent, code P1529.

Hyundai Cars & Trucks

2,967 views

Ask a Question

Usually answered in minutes!

Have a manual for 2004 Hyundai Elantra? Or just drag it here!

Related Topics:

What does codes p1529, p0755 and p1529 mean? I am sure it is something to do with transmission.