Question about 2009 Ford F-150
We already replaced an ignition module on the steering column
Posted by Anonymous on
SOURCE: 95 F150 wont crank
the starter should be replaced. The solenoid is kikcing the pinion out but there is no contact being made to turn the starter motor. I have the exact same truck and before i changed the starter used the old starter tap trick. Tap the starter casing with a hammer and it should start turning again. hope this was helpful for you. Good luck.
Posted on Nov 07, 2008
good old ford lol, try looking at the crank sensor its located at the front of the engine tucked in right hand side of exhaust manifold and gearbox, two pin plug, i have also known these to have no end of faults with the fusebox.
easy to remove, and solder the connections inside they all suffer eventually, if your not to handy with cars i recommend taking to a auto electrician, easy if you know how. Good luck Davelee
Posted on Mar 24, 2009
Sounds alot like the ignition sensor. In my old Chevys it was under the dist cap, mounted on the dist itself. Mine was flat, slightly curved rectangle shape, with two flat prongs coming out both sides. If it would get an internal break in it, you cant see it. I would have the same problem as you, part was only about $12. And comes out with unscrewing two screws.
Might want to give it a shot.
Posted on Sep 21, 2009
Tips for a great answer:
Jul 10, 2015 | 2002 Cadillac Deville
Dec 23, 2013 | 2001 Saturn L-Series
Nov 06, 2012 | 2003 Nissan Altima
Jan 14, 2011 | 1995 Chrysler LHS
Dec 08, 2010 | Dodge Pickup Cars & Trucks
Apr 06, 2010 | 1993 Buick LeSabre
Mar 05, 2010 | 1986 Toyota 4Runner
Feb 28, 2010 | 1997 Buick LeSabre
Apr 08, 2009 | 2000 Nissan Pathfinder
Jul 09, 2014 | 2009 Ford F-150
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: