Question about 1986 Ford Ranger 2WD

Open Question

Vacuum line diagram for a single barrel carb on a 1983 ranger

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 124 Answers

SOURCE: 1987 Ford Ranger 2.0 Liter Vacuum Line Diagram

can you see the diagram under the hood? if not try searching a junkyard for either the diagram or a complete motor

Posted on Mar 23, 2009

Ad
truekleen1

Preacher

  • 46 Answers

SOURCE: 1986 Ford Ranger Vacuum lines wrong

Go to auto zone through this link And register for free then click select vehicle, add your vehicle and go to driveability and Emissions controls, than go to vacuum diagrams.

Posted on May 16, 2009

Ad
canbruce75

Bruce Canfield

  • 1776 Answers

SOURCE: need a vacuum diagram for a ford f-100 with a 302

Check out the autozone.com website and register the truck. It's free and will give you access to an online repair manual for the truck. See if the vacuum diagrams are available there. Hope this helped and best wishes.

Posted on Aug 09, 2009

canbruce75

Bruce Canfield

  • 1776 Answers

SOURCE: I need a diagram for where the vacuum hoses go to

Check out the autozone.com website and register the truck there. It doesn't cost anything and will give you access to an online repair manual for the truck. The vacuum diagrams should be available there. Hope this helped and best wishes.

Posted on Aug 30, 2009

mcdevito75

Michael C. De Vito

  • 1970 Answers

SOURCE: looking for a diagram of a single barrel holley carburetor

mcdevito75 here, A repair manual at your local library could have the diagram.

Posted on Jun 17, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vacuum line hook up 1980 ford fairmont


I did a google search for "1980 ford Fairmont vacuum diagram" and got a ton of images. Bing gave me nothing. Address was too long to try and accurately copy. Go there first and use google.

Dec 16, 2017 | Ford Cars & Trucks

1 Answer

1985 ford ranger, v6 2.8l, 5speed, came without a carburetor and now i have now idea how to follow the regular vacuume line scematic, please hellp with more details or step by step pictures


Matthew, I assume you have replaced the missing carb with a new one, is it an OEM original? or an after market? It matters what carb you put on because of smog laws and whether or not the carb you bought is smog legal for your truck, if it is not the exact same as the factory original then there wont be a correct vacuum line schematic. If when you do have the correct replacement carb then type in (1985 ford ranger, v6 2.8l vacuum line diagram) in to your google search engine, search under " images" there you will find lots of diagrams of vacuum line routing. If you are not able to do any of this then take the truck to a qualified service tech, there are also mobile service mechanics that can help, good luck to you sir. One final note, you can plug each of the vacuum outlets on the carburetor with the appropriate size vacuum caps, this will allow you to start the engine and make minor adjustments, then you can drive the truck to a qualified tech

Apr 15, 2015 | 1985 Ford Ranger

1 Answer

I installed a holley 4 barrel carburetor in my 1983 buick regal , but it starts fine but won't idle ?


Check your vacuum hoses. Holley aftermarket may not have as many vacuum ports as OEM QuadraJets, and you may have a vacuum line that isn't plugged into anything...or you may have a vacuum leak around the carb base gasket. Also, does the Holley have an electric or manual choke? Is it connected?

Sep 29, 2013 | 1984 Buick Regal

1 Answer

Looking for a diagram of a single barrel holley carburetor


mcdevito75 here, A repair manual at your local library could have the diagram.

Jun 16, 2010 | 1983 Ford Ranger

1 Answer

Fuel Filter location in my vehicle?


It has a carb right. It is screwed into the carb. The fuel line is screwed to the filter.

Apr 13, 2010 | 1983 Ford Ranger

1 Answer

Most of the vacum hoses were gone or ports on carb. were plugged.Need a diagarm of were the hoses go on a 1983 Jeep CJ7 with a 258 inline six with a 2 barrel Carter carb.


Most vacuum hoses are colour coded nowaday, not sure about your one, so look carefully at the end of each hose for coloured dots or lines that should line up with the ports also

Aug 23, 2009 | Jeep CJ7 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...