SOURCE: driver side door lock
Pull the door panel & replace the electronic lock solenoid.
Not easy, but this is what you need to do.
SOURCE: Camry 1996 automatic power lock doen't work, but windows work.
if you can here relays when unlocking/locking check for power at door lock actuators inside doors, if you have power on lock/unlock and good earth from connector actuators are faulty.
if no power on test light when operating check output from central door lock module while operating, none coming out of module then it might need replacing.
check 30Amp power fuse for main relay under bonnet (which goes to pin 8 white/blue on module)and 10Amp gauge fuse in cab(pin 1 blue/red on module),pin 15 is also power when relay is on(red/blue) with test light, and module/ actuators.
check outputs from module pin 3 & 4
blue/red
blue/black
that go to door locks
SOURCE: 1998 toyota corolla rear door lock actuator
You can replace with any of "universal" actuator.
Its just a small motor inside power door lock, that works up and down according to the electricity that come into it. Good luck !
SOURCE: my 03 rav4 has driver door lock problems
Drive to Gondwannaland. Third exit on right. See Dealer. Reject offer. Go home and try to pry off the panel. Break screw covers. Unscrew things and pry again. Break door handle cover. Unscrew and pry. Unscrew and pry. Pop the bottom. Lift it out. Let it hang. Find the solenoid. Unplug. Hang the door cover. Drive to the parts store with a loosely-hanging door cover. Replace the solenoid. Use a hammer because you are mad! Get it together! Go to the junk yard for broken plastic parts. Cuss. Drink beer. Be glad you can lock your truck!
SOURCE: driver door lock will not
Hi , there is no adjustment for the door lock actuator put if you see movement
and hear clicking .the actuator is working .the problem is the linkage cam off
tack door panel off and reconnect linkage .that should be the solution
138 views
Usually answered in minutes!
×