Question about 1993 Toyota Corolla

Open Question

Servo sensor for corolla 1993 model - 1993 Toyota Corolla

Posted by Anonymous on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I reset the airbag light sensor on a 1993 Toyota Corolla?

You will need a ABS Scan Tool for your make and model.

Mar 12, 2015 | 1993 Toyota Corolla

1 Answer

Carburetor repair

A 1993 Corolla would have multi-port injection instead of a carb. So you would need to look at the fuel system, especially if the check engine light is on.
One possible cause is a faulty throttle position sensor.

Apr 22, 2013 | 1993 Toyota Corolla

1 Answer

My temperature gage on my 1993 corolla does not work I changed both sensors and thermostar and it still did not work

unplug the sensor that goes to the gauge and take a wire and put it in one end of the sensor wire and touch the other end to the battery ground or any other engine ground and get someone to see if the temp gauge starts to move if it goes all the way to hot then the sensor is bad and if it does not move the gauge is bad or the the wire from sensor to gauge is bad. good luck let me know if i was any help at all...............

Jun 14, 2011 | 1993 Toyota Corolla

1 Answer

What is needed to fix fault codes 14 and 24 for a 1994 toyota corolla

The following is from a Haynes manual for 1993-1996 toyota corolla and geo prism:

Code 14: ignition signal. No ignition signal to the ECM. Check igniter or circuit, ignition coil, ig. switch or circuit, ECM (engine control module or "computer")

Code 24: intake air temperature sensor. Open or short in the intake air temperature sensor circuit. Check intake air temp. sensor or wiring to ECM.

Jan 27, 2011 | 1994 Toyota Corolla

1 Answer

What is the part number for oil filter toyota corolla 1993 model 1.6 GLi

FRAM      P/N  - PH4967
STP              P/N -  S4967


Nov 30, 2010 | 1993 Toyota Corolla

1 Answer

Toyota corolla 1993 2e is jerking while running

could be lots of things
in order from most obvious to least
1.) general maintenance, like spark plugs/wires and fuel filter
2.) failing fuel pump
3.) failing sensors like MAF or TP

bottom line if you have maintained your vehicle do that first
while buying parts have the store pull codes and see what else could be wrong

any further assistance should be directed to the chat room for LIVE questions/answers

Aug 26, 2010 | 1993 Toyota Corolla

2 Answers

Code 21 on toyota corolla 1993

Code 21 is an oxygen/heater sensor, replace the main o2 sensor and clear the code, or sometimes you can just clear the code and it wont come back. Problems with the o2 sensor are normal and usually not that big of a deal.

Mar 24, 2010 | 1993 Toyota Corolla

1 Answer

1993 toyota corolla/ overheats,fan connected directly

It could be the electric fans bad or relays or temp control sensor.

Jul 13, 2009 | 1993 Toyota Corolla

1 Answer

What does code 52 means on the toyota corolla 2000 model in SA.

DTC 52 on a 93 Corolla is a Knock Sensor code. I replace the knock sensor; it is located on the side of the engine block, on the side of the engine that faces the firewall. It is in the center; under the intake manifold.

Thanks for choosing FixYa for assistance.

Mar 09, 2009 | 1993 Toyota Corolla

Not finding what you are looking for?
1993 Toyota Corolla Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides