Changed coil pack , crank and cam sensor it spark but wont start
SOURCE: 2003 chev malibu wont start due to lack of spark
That car has 2 crank sensors , did you replace both? One is at the front crank pulley and the other is behind and low on the engine block, above oil pan. Be sure the ICM (ign control module has a good ground, (black wire) it grounds at a bracket where the trans bolts to the engine approx at the 2 o'clock position.
Testimonial: "the check the ground was a good suggestion, i will do that at my first opportunity"
SOURCE: aveo crank no start, no spark. problem cam or
have scanned to find problem code, if no scanner any auto parts store will scan for free. because you do not what to change the sensors if not bad! have scanned.
SOURCE: my 2002 chevy express 3500
TIMMING CHAIN NEEDS TO B REPLACED AND MOTOR HAS TO BE RESET INTO TIMMING
188 views
Usually answered in minutes!
×