Question about 1999 Ford Taurus
Cranks but wont start
Posted by Anonymous on
Either you may be using a key that you had copied from the original or your chip went bad in your original key. Most of cars now a days have the key censor in the key so if it is the incorrect key it will not start your car or if it does not read that chip it will not start
Posted on Feb 05, 2009
SOURCE: 2001 ford taurus wont start
It could be bad plugs, plug wires, a bad ground will do this as well. Check to see if it has the three main things.
Anther common problem is the crank shaft speed sensor. It will cause it to not spark and not start.
Posted on May 19, 2009
Check the connections in the control panel. Use a pair of U-bent coat hangers to slide into the holes on the two sides of the control panel until the clips engage then pull it out. If these aren't loose, try checking the voltage. You can also check the blower motor relay. It's either in the fuse box in the passenger compartment or in the power distribution box at the front of the engine compartment.
Posted on Jun 28, 2009
Tips for a great answer:
Feb 24, 2014 | 1999 Ford Taurus
Sep 16, 2011 | 1999 Ford Taurus
Nov 01, 2010 | 1999 Ford Taurus
Jun 10, 2010 | 1999 Ford Taurus
Mar 20, 2010 | 1999 Ford Taurus
Feb 20, 2010 | 1999 Ford Taurus
340 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: