Question about Hyundai Accent
Posted by Anonymous on
SOURCE: what does code 1-p0650 mean?
P0650 Malfunction Indicator Lamp (MIL) Control Circuit Malfunction
Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.
Posted on May 10, 2009
ZERO out your ECM (wipe out all 'adaptives'). disconnect both battery post connectors and tough them together for 30 seconds. Afterward, reconnect them to the battery... see what happens
Posted on Sep 12, 2009
Here is what each of your trouble codes means:
DTC P0108 MAP Sensor Range check High
DTC P0121 TPS Circuit Range/Performance Problem
DTC P0340 Camshaft Position Sensor Circuit Malfunction
Do you know how long each of these codes have been stored? Each one of these codes relate to a different part of the vehicle.
Your PO108 codes is probably a faulty Manifold Absolute Pressure Sensor
PO121 is a Throttle Position Sensor malfunction code
PO340 is a Camshaft Position Sensor malfunction code
I would not think that all 3 of these codes all set at the same time, just wouldnt make sense unless there was a problem with the Engine Control Module (ECM) causing all these codes to set at the same time.
Posted on Sep 14, 2011
Sorry to tell you that it is incorrect gear ratio codes. Must replace the transmission.
Posted on Mar 15, 2013
Tips for a great answer:
Jul 24, 2014 | Hyundai Motor 2004 Accent
Apr 02, 2014 | 2005 Kia Spectra
Oct 23, 2013 | Hyundai Cars & Trucks
Mar 14, 2013 | 2001 Hyundai Accent
Sep 14, 2011 | 2003 Hyundai Accent
Aug 10, 2010 | 2003 Hyundai Tiburon
Sep 11, 2009 | Hyundai Motor 2003 Elantra
May 10, 2009 | Hyundai Accent Cars & Trucks
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: