SOURCE: 1991 mighty max
If it is 4X4 and you re not going far. Put the transfer case in neutral. If it is 2X4 standard transmission, put it in neutral. If it is an automatic transmission you need to remove the driveline.
SOURCE: Torque specs for mighty max
Per my Chilton's manual tehe bolts should be (cold engine) 65 to 72 FT. Pnds., the cam shaft bearing bolts should be 8x25 = 15 - 19 Ft pnds and the 8x65 should be 14 - 15 Ft Pnds.
The sequence is as follows for the (10 ) head bolts:
7 - 5 - 2 - 4 - 10
9 - 3 - 1 - 6 - 8
I hope this may help,
Tom
SOURCE: I have a 1991 Mitsubishi Mighty Max and it will not shift into
check the kick down cables and or the eliectrical plugs
SOURCE: put in distributor for 1991 mitsubishi mighty max
Please confirm which engine your truck has; 3.0 V6?
Thanks,
Tom
SOURCE: How do u set the
what timing do you need to know ,valve timing or just setting up the distributor
42 views
Usually answered in minutes!
×